• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

For Sale Full workshop including Excalibur EX-16

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

Aggrajag

Established Member
Joined
30 Nov 2015
Messages
439
Reaction score
3
Location
Sheffield/Rotherham, S Yorks
I hope this is allowed even though I'm not yet asking for a specific price, I'm looking for a sense of interest first...

I used to be a regular visitor here but life changes and health reasons curtailed the hobby and I've not used my gear for about 7-8 years so I'm thinking I ought to clear it out. I've not done a proper inventory as I'm wanting a sense of feedback, is it possible to sell everything at once? Is some of it pointless?

Off the top of my head there's the Excalibur EX-16 scrollsaw with about 200 spare blades all labelled. Foot pedal for easy start/stop. This is the best bit of gear.
Half-decent planer/thicknesser and spare unused blades.
Cheap table saw with spare good quality blade.
Cheap but solid bench drill/press.
Cheap router table and extra 'heads' (I forget the word for the shape/drill part.)
About 20 pieces of wood, 20 pieces of quality plywood, 10 old mahogany kitchen doors/drawers.
Cheap-ish extractor with separate cyclone and tubing.
Another cheap upright extractor and bag. (One was high-speed low-volume, or whatever it is, the other was the other.)
A fair few oils/waxes/varnishes.
Probably loads of sundry items, I'll do a proper inventory if there's interest.

Located 10 mins off J33 of the M1.
 
Hi,
This is a standard answer as this is pretty common type of question.
You won't sell these as a job lot except to a trader who will want them (very) cheap to sell on for their profit.
Your wood and sundries are probably worthless. Give them away to a men's shed and don't be offended if they don't want them either.
Cheap machines have little resale value and no one is going to pay for shipping or travel far to collect them.
We don't allow for sale listings like this thread but the four or five machines from the top of your list and the extractors, you're welcome to list here on the for sale board with firm asking prices and photographs according to the site rules posted in the sticky at the top of that forum.

For prices, do an advanced search on ebay looking at completed sales from the last couple of months and see what they sold for. Ebay asking prices are irrelevant, only the prices things actually sell for tell you anything.

Good luck with your listings if you choose to post some.
 
Last edited:
Status
Not open for further replies.
Back
Top