first attempt at turning a box

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

andy43

Established Member
Joined
3 Jun 2013
Messages
153
Reaction score
0
Location
cheshire
004.jpg
first attempt at turning a box, please be gentle with me :oops:
 

Attachments

  • 004.jpg
    004.jpg
    169.6 KB
Yes well done indeed, it looks like Pitch Pine, did it tend to clog the sandpaper a bit and smell nicely resinous? If it is PP you did well on the finish too.
 
Hi guys
yes it is pitch pine and smelt lovely when turning, it did clog up the sand paper a little bit.

Thank you for the kind comments
Andy
 
Why does everyones first attempt at things look better than my twenty first attempt? :oops:
Lovely bit of work Andy, I'm blown away by the finish for pine. 8)
 
The box looks well turned and finished. You also managed to get quite a good line up of the grain from lid to the bottom, which sometimes gets over looked
 
all I did for the finish was sand going up to 400 grit, then applied a couple coats of sanding sealer then knocked that back with fine steel wool then applied a coat of Chestnut friction polish
cheers
Andy
 
An everyone says that looks an excellent first go at box making.
The lid especially is rather elegant with that finial.
 

Latest posts

Back
Top