For Sale Felder / Hammer / Axminster / Festool / Talbots / Bessey / Leigh

[g1_lo]

You’re not going to want to miss any of these amazing machines and tools up for sale.



All of the below items have been owned from new by myself in a one-man workshop.

Everything has been thoroughly looked after and appreciated.

All items based in Staffordshire ST15 postcode.

Heavy Lifting Items will be available from 3rd week of June.

I’m listing everything with pictures but sure you’re all aware of what everything is and for those that are seriously interested I will send additional photos and or a video of the item wanted if necessary.

I've added a link in each section for the pictures to try and streamline the thread a little.

Happy browsing and let me know if there are any questions.

I will do my best to respond as efficiently as possible but please bear with me.

*I can arrange delivery of the heavy items if needed at cost, the extractor and panel saw will go in a Luton box van as it would be cheaper you collecting, but can try and help out if needed. I have a fork lift on site if needed on collection.

The serious heavy lifting stuff

Felder K500s Sliding Table Saw with scoring unit and 2500mm bed £3750 (3 Phase)

Morso NFS Manual Notching Machine £2300

Axminster Professional AP200 Spindle Moulder with Steff Dual Speed Power Feeder £1400 (240v)

Felder RL200 Clean Air Dust Extractor (if you’ve never had one this will change your workshop life) £3600 (3 Phase)

Hammer A326 Spiral P/T and maintenance package £2400 (230v)

Hammer Bandsaw £800 (230v)

Talbots T75 Waste Wood Burner I’ll endeavour to include as much stainless flue as possible (never go cold or pay to get rid of wood waste again) £3000 (230v)

https://we.tl/t-tRhANx3KXX
Accessories

Spiral Dust Extractor Pipes various sizes, 200,150,100,80 some used some new full lengths still, blast gates and flexible pipes to connect to machines Job lot £250

Spindle Moulder 30mm Tooling job lot over 5k worth of stuff £1000

Clamping
Ideally it would be best for all the clamps and the associated cart to go together. If there is no interest I will then split. £935

Consists of:
Bessey Revo Clamps

8 x 600mm

10 x 1000mm

4 x 1500mm

Bessey extension clamps (basically add any two clamps together) x2

Festool Fixed clamps MFT-SP x2

Heavy Duty 2” Spring clamps x50

Record edge clamps x3

Plano Rail and 3 Clamps

https://we.tl/t-mO7H3iJ91b
Festool

FESTOOL DOMINO XL DF 700 240v EQ-PLUS JOINTING MACHINE SET with dominos and Seneca adapter plates
(Dominoes in 2x systainers and couple new boxes of spares see pictures) £730

FESTOOL RTS 400 REQ-PLUS PALM SANDER 240v in systainer £200 (no picture in link)

Festool Contouro 240v complete set with insert for mounting into worktop for stationary use, spare box of glue £1710

Festool Kapex 120 with supporting arms 110v £900

Festool MFK 700 EQ/B Plus 240v £180

Festool ROTEX Geared Eccentric Sander RO 150 FEQ-PLUS 110V in systatiner £300

Festool OF 1400 EBQ 110v Router £300

Festool CTL 26E 110v Dust Extractor with standard hose and covered suction hose and 240v plug (extractor is 110v) £320

https://we.tl/t-aX4gx2sAPY
Other

Paslode IM350 First Fix Nail Gun £250

Paslode IM65 F16 Second Fix Nail Gun £280

Souber DBB Morticer Drilling Kit £60

https://we.tl/t-59GsntRjbs
Dovetailing

Leigh D4R Dovetail Jig complete £430
https://we.tl/t-RRYY6gZnuS[/URL] [U][S]Storage[/S][/U] [S]Triton 330190 WRA001 WoodRack Storage System 10 pieces £250[/S]

 

[OrangeFive]

Can you put my name on the bandsaw please

 

[Ollie78]

Well typically I am skint, otherwise I would be interested in the spindle and tooling, and the clamps.

Never mind !!

Ollie

 

[deanflyer]

Interested in the AP200 and tooling and the A326. At work at the moment though. I'll PM you and catch up later.

 

[Mooose]

Interested in the Festool Domino (FESTOOL DOMINO XL DF 700) if available

 

[MikeH]

Do you have any more details on the dust extractor pipes and bits please?

 

[g1_lo]

Interested in the Festool Domino (FESTOOL DOMINO XL DF 700) if available

Moose still available DM me if you have any questions or to reserve.

 

[g1_lo]

Do you have any more details on the dust extractor pipes and bits please?

Mike, I guess I should of done a little inventory. But just for a feel to see if your interested.

Its all spiral and aluminium gates.
There's a big bag of unused bends reducers etc various sizes
5/6 blast gates with lock off
At least 2 lengths of each 100/125/150/200 some are new unused but I'd need to check as not looked at it in a while.
Then there's various flexible hoses to connect again varying sizes and lengths, basically what's currently on the machines and then a big box or surplus.
Also a good handful of clamps/hanging brackets and threaded bar for like suspending it in the air.

 

[deema]

Interested in the spindle moulding tooling, what do you have?

 

[g1_lo]

Interested in the spindle moulding tooling, what do you have?

I'll do a inventory of everything later so everyone can have a fair stab at it and update the post.

 

[MikeH]

Thanks for the extra info. I will have to pass on that as it isn't really what I am after, but thanks all the same. Good luck with your sales.

 

[Jameshow]

Well typically I am skint, otherwise I would be interested in the spindle and tooling, and the clamps.

Never mind !!

Ollie

Would love them do they come with instructions to build dog house... ?!

 

[pgrbff]

price for plano?

 

[houtslager]

You’re not going to want to miss any of these amazing machines and tools up for sale.



All of the below items have been owned from new by myself in a one-man workshop.

Everything has been thoroughly looked after and appreciated.

All items based in Staffordshire ST15 postcode.

Heavy Lifting Items will be available from 3rd week of June.

I’m listing everything with pictures but sure you’re all aware of what everything is and for those that are seriously interested I will send additional photos and or a video of the item wanted if necessary.

I've added a link in each section for the pictures to try and streamline the thread a little.

Happy browsing and let me know if there are any questions.

I will do my best to respond as efficiently as possible but please bear with me.

*I can arrange delivery of the heavy items if needed at cost, the extractor and panel saw will go in a Luton box van as it would be cheaper you collecting, but can try and help out if needed. I have a fork lift on site if needed on collection.

The serious heavy lifting stuff

Felder K500s Sliding Table Saw with scoring unit and 2500mm bed £4500 (3 Phase)

Morso NFS Manual Notching Machine £3000

Axminster Professional AP200 Spindle Moulder with Steff Dual Speed Power Feeder £1400 (240v)

Felder RL200 Clean Air Dust Extractor (if you’ve never had one this will change your workshop life) £4500 (3 Phase)

Hammer A326 Spiral P/T and maintenance package £2400 (230v)

Hammer Bandsaw £800 (230v)

Talbots T75 Waste Wood Burner I’ll endeavour to include as much stainless flue as possible (never go cold or pay to get rid of wood waste again) £3800 (230v)

https://we.tl/t-tRhANx3KXX
Accessories

Spiral Dust Extractor Pipes various sizes, 200,150,100,80 some used some new full lengths still, blast gates and flexible pipes to connect to machines Job lot £250

Spindle Moulder 30mm Tooling job lot over 5k worth of stuff £1000

Clamping
Ideally it would be best for all the clamps and the associated cart to go together. If there is no interest I will then split. £935

Consists of:
Bessey Revo Clamps

8 x 600mm

10 x 1000mm

4 x 1500mm

Bessey extension clamps (basically add any two clamps together) x2

Festool Fixed clamps MFT-SP x2

Heavy Duty 2” Spring clamps x50

Record edge clamps x3

Plano Rail and 3 Clamps

https://we.tl/t-mO7H3iJ91b
Festool

FESTOOL DOMINO XL DF 700 240v EQ-PLUS JOINTING MACHINE SET with dominos and Seneca adapter plates
(Dominoes in 2x systainers and couple new boxes of spares see pictures) £730

FESTOOL RTS 400 REQ-PLUS PALM SANDER 240v in systainer £200 (no picture in link)

Festool Contouro 240v complete set with insert for mounting into worktop for stationary use, spare box of glue £1710

Festool Kapex 120 with supporting arms 110v £900

Festool MFK 700 EQ/B Plus 240v £180

Festool ROTEX Geared Eccentric Sander RO 150 FEQ-PLUS 110V in systatiner £300

Festool OF 1400 EBQ 110v Router £300

Festool CTL 26E 110v Dust Extractor with standard hose and covered suction hose and 240v plug (extractor is 110v)

https://we.tl/t-aX4gx2sAPY
Other

Paslode IM350 First Fix Nail Gun £250

Paslode IM65 F16 Second Fix Nail Gun £280

Souber DBB Morticer Drilling Kit £60

https://we.tl/t-59GsntRjbs
Dovetailing

Leigh D4R Dovetail Jig complete £430
https://we.tl/t-RRYY6gZnuS
Storage

Triton 330190 WRA001 WoodRack Storage System 10 pieces £250

I'm up for the edgebander and the clamps if we can do a cash deal - pm me your location please so I can plan my route from the Cotswolds. Karl

 

[g1_lo]

Just updated to include items that have sold, still some items left.

 

[Nic_the_Urchin]

Hi there I’m interested in the Paslode First Fix if it’s still available please?

Nic

 

[dazzer]

Hi can you tell me what’s included with the Leigh D4R jig?
cheers Dave

 

[g1_lo]

Hi can you tell me what’s included with the Leigh D4R jig?
cheers Dave

Unfortunately it’s now sold.

 

[dazzer]

Unfortunately it’s now sold.

No problem thanks for letting me know

 

[CoolNik]

You’re not going to want to miss any of these amazing machines and tools up for sale.



All of the below items have been owned from new by myself in a one-man workshop.

Everything has been thoroughly looked after and appreciated.

All items based in Staffordshire ST15 postcode.

Heavy Lifting Items will be available from 3rd week of June.

I’m listing everything with pictures but sure you’re all aware of what everything is and for those that are seriously interested I will send additional photos and or a video of the item wanted if necessary.

I've added a link in each section for the pictures to try and streamline the thread a little.

Happy browsing and let me know if there are any questions.

I will do my best to respond as efficiently as possible but please bear with me.

*I can arrange delivery of the heavy items if needed at cost, the extractor and panel saw will go in a Luton box van as it would be cheaper you collecting, but can try and help out if needed. I have a fork lift on site if needed on collection.

The serious heavy lifting stuff

Felder K500s Sliding Table Saw with scoring unit and 2500mm bed £3750 (3 Phase)

Morso NFS Manual Notching Machine £2300

Axminster Professional AP200 Spindle Moulder with Steff Dual Speed Power Feeder £1400 (240v)

Felder RL200 Clean Air Dust Extractor (if you’ve never had one this will change your workshop life) £3600 (3 Phase)

Hammer A326 Spiral P/T and maintenance package £2400 (230v)

Hammer Bandsaw £800 (230v)

Talbots T75 Waste Wood Burner I’ll endeavour to include as much stainless flue as possible (never go cold or pay to get rid of wood waste again) £3000 (230v)

https://we.tl/t-tRhANx3KXX
Accessories

Spiral Dust Extractor Pipes various sizes, 200,150,100,80 some used some new full lengths still, blast gates and flexible pipes to connect to machines Job lot £250

Spindle Moulder 30mm Tooling job lot over 5k worth of stuff £1000

Clamping
Ideally it would be best for all the clamps and the associated cart to go together. If there is no interest I will then split. £935

Consists of:
Bessey Revo Clamps

8 x 600mm

10 x 1000mm

4 x 1500mm

Bessey extension clamps (basically add any two clamps together) x2

Festool Fixed clamps MFT-SP x2

Heavy Duty 2” Spring clamps x50

Record edge clamps x3

Plano Rail and 3 Clamps

https://we.tl/t-mO7H3iJ91b
Festool

FESTOOL DOMINO XL DF 700 240v EQ-PLUS JOINTING MACHINE SET with dominos and Seneca adapter plates
(Dominoes in 2x systainers and couple new boxes of spares see pictures) £730

FESTOOL RTS 400 REQ-PLUS PALM SANDER 240v in systainer £200 (no picture in link)

Festool Contouro 240v complete set with insert for mounting into worktop for stationary use, spare box of glue £1710

Festool Kapex 120 with supporting arms 110v £900

Festool MFK 700 EQ/B Plus 240v £180

Festool ROTEX Geared Eccentric Sander RO 150 FEQ-PLUS 110V in systatiner £300

Festool OF 1400 EBQ 110v Router £300

Festool CTL 26E 110v Dust Extractor with standard hose and covered suction hose and 240v plug (extractor is 110v) £320

https://we.tl/t-aX4gx2sAPY
Other

Paslode IM350 First Fix Nail Gun £250

Paslode IM65 F16 Second Fix Nail Gun £280

Souber DBB Morticer Drilling Kit £60

https://we.tl/t-59GsntRjbs
Dovetailing

Leigh D4R Dovetail Jig complete £430
https://we.tl/t-RRYY6gZnuS[/URL] [U][S]Storage[/S][/U] [S]Triton 330190 WRA001 WoodRack Storage System 10 pieces £250[/S]

If you would consider sending the to a UK address, I would consider purchasing 3 or 4 of the festoon items, still showing as available. Are they still available? I would want to use PayPal to pay you, no costs on your end, only on mine. Cheers Robyn