Niall Church
Established Member
- Joined
- 22 Apr 2023
- Messages
- 233
- Reaction score
- 11
...they're too big for the milled recesses in my Basa 3 bandsaw
My recesses are off limits,BUT,the onse on the bandsaw are 13mm, 11.9mmis the bar that'll go into the recess!Would it not help a speedy resolution of your problem if you were to tell us the size of your recess?
Recess is 13mm wide ,8.4mm depth@My recesses are off limits,BUT,the onse on the bandsaw are 13mm, 11.9mmis the bar that'll go into the recess!
Recess is 13mm wide ,8.4mm depth
Beware the Rutland’s kit - it’s all imperial sizes.They also come with either a 1/4 - 20 UNC thread or metric, the 1/4 being more popular as it is used by Kreg and the American brands, then you find you need non metric spanners and allen keys which can be a right pain when you put it in with your metric keys before realising. Some places to look
https://www.amazon.co.uk/POWERTEC-QTB1008-4-Inch-20-2-Inch-20-Pack/dp/B07GS3YS9R?th=1
https://www.axminstertools.com/ujk-technology-t-slot-bolts-pkt-10-ax977684
or maybe a kit
https://www.rutlands.com/products/t-track-hardware-kit-set-of-58
https://www.axminstertools.com/axminster-148-piece-jig-making-set-950114
Recess is 13mm wide ,8.4mm depth
Enter your email address to join: