Bandsaw blades advice

Ruskie7 · 8 Oct 2017

Hi all,

I have a Charnwood 14 inch prem bandsaw.

I am looking for some advice on what new blades to get for it. I am kinda sold on the tuffsaw blades

But I am unsure of what width of the blade and too to get

I am looking to do resawing and also looking to do some curve work/ shapes etc.

Any advice would be appreciated I understand it may be more than one blade which is fine.

Phil Pascoe · 8 Oct 2017

Get hold of Tuffsaws, tell them what you wish to do and they will advise you on the best blades for your purposes.

sunnybob · 9 Oct 2017

Best to email Ian at tuffsaws, phone calls take him away from his work.

Meanwhile, have a read;
http://www.allbandsawblades.com/blade_width.htm

Phil Pascoe · 9 Oct 2017

Actually there is quite a lot of information on his site.

MikeJhn · 9 Oct 2017

For Re-sawing you need the widest and biggest tooth blade your machine can tension.

For radius work the blade width is dictated by the radius of the cut you want. i.e. 5/8 radius 1/4" blade, 5/8 blade 4" radius and any variation in-between.

All of this information can be found on TuffSaws site: http://www.tuffsaws.co.uk/index.php?rou ... tion_id=13

Mike