Are you thinking of splashing the cash on a jointing machine for xmas ?

[Spectric]

Well if you are, here is a quick overview of what the machine will cost, replacement cutters and the fixings so you get an idea of overall cost of ownership to give you a starting point for that big decision, having the basic facts in one place often helps. Look at the weight of the xl700 !

Any errors please let me know but it is a guide rather than definitive.

 

[fleyh]

Small correction.
In DF500 column - weight shown is the tool weight
In DF700 - weight shown is the transport weight with accessories
According to this page: DF700 tool weight is under 6kg.

 

[woodieallen]

But you don't need to spend that much on an XL 700. I know of this one for sale that is as good as new !

https://www.ukworkshop.co.uk/threads/reduced-price-festool-domino-xl-df-700-eq-plus.150215/

 

[Spectric]

so quote "The absence of any scratches, dents and dried paint should tell you that this DF700 is immaculate and has had very little use."

So @woodieallen you basically hired one for a job, is there not a chance that if you sell it then you might need it ? Also if you were back at square one would you still have chosen the 700, I suspect for your jobs it would be yes as that machine has both the depth and size of fixings.

 

[Jake]

On a quick look on the net, I can't see a DDF40 new for less than £1k (didn't see your £940 except for a SH one on Ebay), but DF500 available at £900 (you say £1240) and DF700 at £1250 (you say £1400).

That's all just using the shopping tab rather than a proper pre-purchase dive.

 

[woodieallen]

so quote "The absence of any scratches, dents and dried paint should tell you that this DF700 is immaculate and has had very little use."

So @woodieallen you basically hired one for a job, is there not a chance that if you sell it then you might need it ? Also if you were back at square one would you still have chosen the 700, I suspect for your jobs it would be yes as that machine has both the depth and size of fixings.

If I thought I was going to need it then I wouldn't be selling it !

Yes, I would choose the 700 again.

 

[Spectric]

On a quick look on the net, I can't see a DDF40 new for less than £1k

This is why it is important to shop around, no one seems to always be the cheapest for anything, cheapest one week and the dearest the next week !

https://www.dm-tools.co.uk/Mafell-D...LZ8pXSClTGOLr21siAYi0Ej2JYMqQu7Dzy-Cg4tvVdwMn

 

[TRITON]

I'd opt for the larger domino

Biscuits are so yesterday, and dual doweller is positivity antique

 

[Spectric]

According to this page: DF700 tool weight is under 6kg.

Well spotted, the 700 is 6.2 Kg and there was me thinking I was stronger than I thought but it is still twice the weight of the 500.

 

[Jake]

This is why it is important to shop around, no one seems to always be the cheapest for anything, cheapest one week and the dearest the next week !

https://www.dm-tools.co.uk/Mafell-D...LZ8pXSClTGOLr21siAYi0Ej2JYMqQu7Dzy-Cg4tvVdwMn

Fair enough, but best to do that for all of them then!