Hi all,
I’m looking to build a general garden workshop and need some ideas and advice as to what size I can go to and position, given the constraints of space and boundaries.
Ideally I’d like to build something like this -
My available space is sketched out here, where the rear of the above unit would be against the garage wall with the doors facing the house.
We are off the road via a short private drive, so we don’t have an issue with having something facing the road. Here’s a google earth image showing where we are looking at. Over the fence is open ground with a track/footpath (dirt) about seven or 8 metres away.
And here’s a view from the drive looking into the space.
I’d like to have it a useable height internally, so I’m interested in what the internal height could be with the 2.5m regulation. If possible I want to avoid planning permission but will go for it if necessary.
I’m also going to have to be strict on budget, so will cut back on material costs where it’s not visible. We will be putting a fence between the garage and house so this means three of the walls will not be seen, so will likely use metal sheeting for minimum maintenance. I’m wondering can I actually use the garage wall as the rear wall.
Foundation we will likely go the concrete bed route as this seems to keep the height to a minimum.
Any thoughts or ideas appreciated, thank you.
I’m looking to build a general garden workshop and need some ideas and advice as to what size I can go to and position, given the constraints of space and boundaries.
Ideally I’d like to build something like this -
My available space is sketched out here, where the rear of the above unit would be against the garage wall with the doors facing the house.
We are off the road via a short private drive, so we don’t have an issue with having something facing the road. Here’s a google earth image showing where we are looking at. Over the fence is open ground with a track/footpath (dirt) about seven or 8 metres away.
And here’s a view from the drive looking into the space.
I’d like to have it a useable height internally, so I’m interested in what the internal height could be with the 2.5m regulation. If possible I want to avoid planning permission but will go for it if necessary.
I’m also going to have to be strict on budget, so will cut back on material costs where it’s not visible. We will be putting a fence between the garage and house so this means three of the walls will not be seen, so will likely use metal sheeting for minimum maintenance. I’m wondering can I actually use the garage wall as the rear wall.
Foundation we will likely go the concrete bed route as this seems to keep the height to a minimum.
Any thoughts or ideas appreciated, thank you.