AndyG
Established Member
Here's a run-through of my current woodworking bookshelf. There is a minefield of woodworking books out there. Hopefully this list may help guide someone's future book purchases.
It's very true that you learn by trying, but I still think you can learn an great deal from a good book. There are some gems here.
I'd love to hear your comments and suggestions for further books. Especially those that could be considered 'Design Inspiration'.
Notes:
- The published date states the latest listed in the book, so hopefully it refers to that particular books release date.
- You'll need to have HTML enabled in your profile for this page to display properly
Hand Tools
<table><tr valign="top"><td>
</td><td>Title: The Handplane Book
Author(s): Garrett Hack
Published: 1999
ISBN: 1-56158-712-5
Images: Colour photos
Details: This book is enough to start a hand plane obsession in even the most power tool loving woodworker. It has sections on history, restoration, what to look for when buying. There are lots of great full colour pictures of various planes. A really great book, and a must for the bookshelf.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: Planecraft
Author(s): C. W. Hampton, E. Clifford
Published: 1959 (7th Edition)
ISBN: none
Images: BW Handdrawn
Details: I'm guessing the book was sponsored/written by Record, as all the planes refer to their range. A chapter is dedicated to each of all the different types of handplane. Information on usage and adjustment. A great book, and well worth hunting down.
Newer versions of this book are still available (through Lie-Nielsen), however, word has it that the older versions (1950's) are better. These can be picked up at 2nd hand book stores, mine came from www.abebooks.co.uk.
Rating:
</td></tr></table>
Power Tools
<table><tr valign="top"><td>
</td><td>Title: The Bandsaw Book
Author(s): Lonnie Bird
Published: 1999
ISBN: 1-56158-289-1
Images: Colour photos
Details: One of the two regularly suggested books on bandsaws. Definitely worth buying if you are thinking of buying a bandsaw, and probably worth buying after you have one too. Plenty of tips on getting your saw doing what you want.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: The Woodworkers Bible
Author(s): Alf Martensson
Published: 1995
ISBN: 0-7136-2685-2
Images: BW photos/drawings
Details: One of those all rounder books. It has sections on powertools and handtools. Not one of my favourite books, but it has some good nuggets of info all the same.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: Table Saw Techniques
Author(s): Roger W. Cliffe
Published: 1997
ISBN: 0-8069-4268-1
Images: BW photos
Details: I bought this when trying to decide whether to buy a bandsaw or a table saw. I went for a bandsaw, so in the end haven't studied this book that much. However, it does contain a lot of tips and is probably worth considering if you're a table saw owner.
Rating:
</td></tr></table>
Workshop
<table><tr valign="top"><td>
</td><td>Title: The Workbench Book
Author(s): Scott Landis
Published: 1998
ISBN: 1-56158-270-0
Images: Colour photos
Details: This really is The workbook bench. Full of different bench making ideas. The author has really investigated the subject well, looking at workbenches and working styles from all over the world.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: Woodshop Dust Control
Author(s): Sandor Nagyszalanczy
Published: 2002
ISBN: 1-56158-499-1
Images: Colour photos
Details: Dust collection is hardly the most interesting topic, but this books does a fairly good job of introducing the subject. Probably worth buying when it's time for a proper duct/chip collecting system, however, there isn't that much more in this book that couldn't be found in the forum, or further out in the web.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: Setting Up Shop
Author(s): Sandor Nagyszalanczy
Published: 2001
ISBN: 1-56158-555-6
Images: Colour photos
Details: This book does a good job of making you jealous of other people's workshops. It covers most aspects of setting up a workshop. It does have some good ideas, especially on ways to improve storage.
Rating:
</td></tr></table>
Techniques
<table><tr valign="top"><td>
</td><td>Title: Encyclopedia of Furniture Making
Author(s): Ernest Joyce, Alan Peters
Published: 1987 (7th Edition)
ISBN: 0-8069-7142-8
Images: BW photos/drawings
Details: Joyce, if you've not got it, order one now. A wealth of information covering almost everything; tool usage, joinery, carcass construction, it's all there. It's only downside is because it tries to cover everything, sometimes the details are a bit sketchy. Even so, a must have.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: The Complete Illustrated Guide to Joinery
Author(s): Gary Rogowski
Published: 2002
ISBN: 1-56158-401-0
Images: Colour photos
Details: This books is exactly what the title says it is. Endless instructions on how to make a variety different joints. Furthermore, in some cases more than approach is given per joint. Sometimes the details are a bit lacking and you'll find yourself having to fill the gaps. Well worth buying, even if it'll only be used as a reference to joint names.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: Furniture Making Techniques - Volume One
Author(s): David Charlesworth
Published: 2003
ISBN: 1-86108-125-1
Images: Colour photos
Details: I've only recently 'got around' to ordering this book. It's beautifully presented, and is a very good read. Lots of tips on hand planes and chisels, with a few projects thrown in. Definitely recommended if you're just starting out, it'll certainly help with buying decisions. My only criticism is the poor editing, some figures and photos are pages away from the references. An otherwise brilliant book.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: Furniture Making Techniques - Volume Two
Author(s): David Charlesworth
Published: 2003
ISBN: 1-86108-295-9
Images: Colour photos
Details: Equally good as volume one. This covers saws, some more on planes and chisels. A good bit on clamping projects.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: The Complete Guide to Sharpening
Author(s): Leonard Lee
Published: 1995
ISBN: 1-56158-125-9
Images: BW photos/drawings
Details: This really is the complete guide to sharpening. There are instruction on how to sharpen everything. The book starts with a description on what 'sharp' really means, and how this relates to metal. This theoretical knowledge is well worth reading. My only complaint is that sometimes you wish there was a bit more information in places. This particular edition is no longer in print. I'm not sure how the newer version compares. Again www.abebooks.co.uk, may be able to help.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: Woodwork Technology for Schools and Colleges
Author(s): John Trefford, Guy McMurdo
Published: 1980
ISBN: 0-7217-4008-1
Images: 3 colour drawings
Details: A nice intro to woodworking. It's like a mini Joyce. Would make a good workshop reference.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: The Illustrated Encyclopedia of Working in Wood
Author(s): Ernest Scott
Published: 1994
ISBN: 1-85152-875-X
Images: BW drawings
Details: Another all-rounder. This book is full of details drawings/sketches. These are very helpful when trying to workout how something could be constructed. There are sections on design, tools, methods (carving, turning), materials. A good book for someone who might be wondering where to start in woodworking.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: Woodworking for General Certificate
Author(s): G. W. Brazier, N. A. Harris
Published: 1962
ISBN: none
Images: BW drawings
Details: This is an amazing book, picked up at a car boot sale. If you can find a copy, buy it. It's a no nonsense guide full of information. It's an all-rounder, covering; wood technology, design and construciton, tools and some history. A real shame books like this aren't still in press.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: The Chairmaker's Workshop
Author(s): Drew Langsner
Published: 2000
ISBN: 1-57990-230-8
Images: BW photos
Details: Everything you've ever wanted to know about making windsor chairs. Lots of very clear instructions, with basic plans for a number of chairs. A very good book if you want to make Windsor chairs.
Rating:
</td></tr></table>
Ideas/Projects
<table><tr valign="top"><td>
</td><td>Title: The Fine Art of Cabinetmaking
Author(s): James Krenov
Published: 1992
ISBN: 0-8069-8572-0
Images: BW photos
Details: This book has a lot of fans. I'm not really one of them. In between all the fluff there is some good content, but mostly it's just ramblings. I think money could be better spent.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: Making Heirloom Boxes
Author(s): Peter Lloyd
Published: 2002
ISBN: 1-86108-176-6
Images: Colour photos
Details: A great book for ideas of box making. There are no amazing techniques discussed, although the bit on hinge making is good. It has some lovely pictures to get ideas from.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
</td><td>Title: The Complete Practical Woodworker
Author(s): Stephen Corbett
Published: 2002
ISBN: 1-84309-687-0
Images: Colour photos
Details: A very basic intro to woodworking. It does contain a lot of project ideas. A good book for a starter, but you'll soon be reaching for the books that contain more advanced content.
Rating:
</td></tr></table>
Cheers
Andy
It's very true that you learn by trying, but I still think you can learn an great deal from a good book. There are some gems here.
I'd love to hear your comments and suggestions for further books. Especially those that could be considered 'Design Inspiration'.
Notes:
- The published date states the latest listed in the book, so hopefully it refers to that particular books release date.
- You'll need to have HTML enabled in your profile for this page to display properly
Hand Tools
<table><tr valign="top"><td>
Author(s): Garrett Hack
Published: 1999
ISBN: 1-56158-712-5
Images: Colour photos
Details: This book is enough to start a hand plane obsession in even the most power tool loving woodworker. It has sections on history, restoration, what to look for when buying. There are lots of great full colour pictures of various planes. A really great book, and a must for the bookshelf.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): C. W. Hampton, E. Clifford
Published: 1959 (7th Edition)
ISBN: none
Images: BW Handdrawn
Details: I'm guessing the book was sponsored/written by Record, as all the planes refer to their range. A chapter is dedicated to each of all the different types of handplane. Information on usage and adjustment. A great book, and well worth hunting down.
Newer versions of this book are still available (through Lie-Nielsen), however, word has it that the older versions (1950's) are better. These can be picked up at 2nd hand book stores, mine came from www.abebooks.co.uk.
Rating:
</td></tr></table>
Power Tools
<table><tr valign="top"><td>
Author(s): Lonnie Bird
Published: 1999
ISBN: 1-56158-289-1
Images: Colour photos
Details: One of the two regularly suggested books on bandsaws. Definitely worth buying if you are thinking of buying a bandsaw, and probably worth buying after you have one too. Plenty of tips on getting your saw doing what you want.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): Alf Martensson
Published: 1995
ISBN: 0-7136-2685-2
Images: BW photos/drawings
Details: One of those all rounder books. It has sections on powertools and handtools. Not one of my favourite books, but it has some good nuggets of info all the same.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): Roger W. Cliffe
Published: 1997
ISBN: 0-8069-4268-1
Images: BW photos
Details: I bought this when trying to decide whether to buy a bandsaw or a table saw. I went for a bandsaw, so in the end haven't studied this book that much. However, it does contain a lot of tips and is probably worth considering if you're a table saw owner.
Rating:
</td></tr></table>
Workshop
<table><tr valign="top"><td>
Author(s): Scott Landis
Published: 1998
ISBN: 1-56158-270-0
Images: Colour photos
Details: This really is The workbook bench. Full of different bench making ideas. The author has really investigated the subject well, looking at workbenches and working styles from all over the world.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): Sandor Nagyszalanczy
Published: 2002
ISBN: 1-56158-499-1
Images: Colour photos
Details: Dust collection is hardly the most interesting topic, but this books does a fairly good job of introducing the subject. Probably worth buying when it's time for a proper duct/chip collecting system, however, there isn't that much more in this book that couldn't be found in the forum, or further out in the web.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): Sandor Nagyszalanczy
Published: 2001
ISBN: 1-56158-555-6
Images: Colour photos
Details: This book does a good job of making you jealous of other people's workshops. It covers most aspects of setting up a workshop. It does have some good ideas, especially on ways to improve storage.
Rating:
</td></tr></table>
Techniques
<table><tr valign="top"><td>
Author(s): Ernest Joyce, Alan Peters
Published: 1987 (7th Edition)
ISBN: 0-8069-7142-8
Images: BW photos/drawings
Details: Joyce, if you've not got it, order one now. A wealth of information covering almost everything; tool usage, joinery, carcass construction, it's all there. It's only downside is because it tries to cover everything, sometimes the details are a bit sketchy. Even so, a must have.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): Gary Rogowski
Published: 2002
ISBN: 1-56158-401-0
Images: Colour photos
Details: This books is exactly what the title says it is. Endless instructions on how to make a variety different joints. Furthermore, in some cases more than approach is given per joint. Sometimes the details are a bit lacking and you'll find yourself having to fill the gaps. Well worth buying, even if it'll only be used as a reference to joint names.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): David Charlesworth
Published: 2003
ISBN: 1-86108-125-1
Images: Colour photos
Details: I've only recently 'got around' to ordering this book. It's beautifully presented, and is a very good read. Lots of tips on hand planes and chisels, with a few projects thrown in. Definitely recommended if you're just starting out, it'll certainly help with buying decisions. My only criticism is the poor editing, some figures and photos are pages away from the references. An otherwise brilliant book.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): David Charlesworth
Published: 2003
ISBN: 1-86108-295-9
Images: Colour photos
Details: Equally good as volume one. This covers saws, some more on planes and chisels. A good bit on clamping projects.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): Leonard Lee
Published: 1995
ISBN: 1-56158-125-9
Images: BW photos/drawings
Details: This really is the complete guide to sharpening. There are instruction on how to sharpen everything. The book starts with a description on what 'sharp' really means, and how this relates to metal. This theoretical knowledge is well worth reading. My only complaint is that sometimes you wish there was a bit more information in places. This particular edition is no longer in print. I'm not sure how the newer version compares. Again www.abebooks.co.uk, may be able to help.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): John Trefford, Guy McMurdo
Published: 1980
ISBN: 0-7217-4008-1
Images: 3 colour drawings
Details: A nice intro to woodworking. It's like a mini Joyce. Would make a good workshop reference.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): Ernest Scott
Published: 1994
ISBN: 1-85152-875-X
Images: BW drawings
Details: Another all-rounder. This book is full of details drawings/sketches. These are very helpful when trying to workout how something could be constructed. There are sections on design, tools, methods (carving, turning), materials. A good book for someone who might be wondering where to start in woodworking.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): G. W. Brazier, N. A. Harris
Published: 1962
ISBN: none
Images: BW drawings
Details: This is an amazing book, picked up at a car boot sale. If you can find a copy, buy it. It's a no nonsense guide full of information. It's an all-rounder, covering; wood technology, design and construciton, tools and some history. A real shame books like this aren't still in press.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): Drew Langsner
Published: 2000
ISBN: 1-57990-230-8
Images: BW photos
Details: Everything you've ever wanted to know about making windsor chairs. Lots of very clear instructions, with basic plans for a number of chairs. A very good book if you want to make Windsor chairs.
Rating:
</td></tr></table>
Ideas/Projects
<table><tr valign="top"><td>
Author(s): James Krenov
Published: 1992
ISBN: 0-8069-8572-0
Images: BW photos
Details: This book has a lot of fans. I'm not really one of them. In between all the fluff there is some good content, but mostly it's just ramblings. I think money could be better spent.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): Peter Lloyd
Published: 2002
ISBN: 1-86108-176-6
Images: Colour photos
Details: A great book for ideas of box making. There are no amazing techniques discussed, although the bit on hinge making is good. It has some lovely pictures to get ideas from.
Rating:
</td></tr></table>
<table><tr valign="top"><td>
Author(s): Stephen Corbett
Published: 2002
ISBN: 1-84309-687-0
Images: Colour photos
Details: A very basic intro to woodworking. It does contain a lot of project ideas. A good book for a starter, but you'll soon be reaching for the books that contain more advanced content.
Rating:
</td></tr></table>
Cheers
Andy