9mm groover router cutter?

[superunknown]

Hi all,

Anybody know where I can buy a 9mm groover router cutter? I seem to be able to find every other size!

Thank you

 

[Oryxdesign]

You could get one of those stacking sets so you can make up any size?

 

[chippy1970]

Wealdens do a 9.5mm slotter if that's any good

 

[eribaMotters]

The Wealden is what I used until recently on a 1/2" arbor.This is ideal for the 9mm mdf panels I use in kitchen doors.

http://www.wealdentool.com/acatalog/Onl ... r_134.html

Colin

 

[superunknown]

I do mostly use Wealden tools cutter, but they don't do a 9mm, only 9.5mm.

eribaMotters, do you use the 9.5mm? I considered this but think it would be a slightly sloppy fit.

Simon, that maybe my solution ;-)

 

[eribaMotters]

It is the 9.5mm that I use. I have found that this is the correct size for 9mm mdf panels. When I bought a wobble saw for my spindle I originally set it to 9mm, but found the fit was tight and increased it to nearer the 9.5mm of the Wealden groover.

Colin

 

[superunknown]

Thank you Colin, I will give it a try!