Search results

The answer is "A Sheer Drop"

If a centipede a pint what would a precipice?

The beam mentioned lasted over 20 years. The report provided overlooks that torsional resistance was provided by the supporting cross beams along the span.

The distress shown by the front beam shows it is sagging by failure of it's structure and not by a problem of over loading. It needs to be replaced.

Hi after 20 years in place and perhaps without any maintenance a renewal seems the best solution to restore the visual aspects for your customer. Good luck.

B&Q stock 3 ft. high fence panels which could be easier to slot in under the tree area.

Another way to check the buried supply pipe to your property for leaks. 1. Fill a cup with water. 2. Turn off the water supply at the Utilities valve. 3. Dip outlet of cold tap into the cup of water. 4. Turn cold tap on. If water level in cup falls then the supply pipeline in leaking under...

A standard eye connector could be adapted to fit.

Hi Cozzer. In your position in I would contact your Water Utility supplier for emergency attention to your house water supply. The conditions of banging pipes you mention could be due to air that has got into the supply to your property. There might be a water main issue affecting your property...

Hi Adrian. Set the table perpendicular to the blade and adjust the pointed indicator to the 0 degree setting on the table adjuster gauge/locking part.

Hi stephenharris. I have the same model Katsu router as you. The tool is much more versatile and easier to use when grooving edges and faces when the plunge base is used. Have a look at the Aim Tools web site.

Hi all I use this load tester to keep an eye on my Makita 18v batteries. The tester is connected using small electrical spring clips and M12 washers pushed into battery terminals.

Using 2no 4"x2" C16 grade timber beams with a length of 2 metres attached somehow to the rear of an average van will produce a ramp inclined at around 14 degrees to the horizontal. 2no C16 timber beams with this length will support a maximum point load at mid span of around 500Kg but the beams...

Have a look at Aim Tools web site.

The UK accepted EU legislation concerning road vehicle speedometer accuracy. It has already been stated the a speedometer must not show a reading below the vehicle true speed but is permitted to display a reading that is 10% + 10 Km/h [6.25mph] above the displayed speed.

Lancashire Police have a tolerance for error for speeding matters of 10% + 3mph.

Blister your saw is a steal. A quick sale is certain.