Tital scroll saw - blade not vertical

[AdrianBaluta]

Hello,

I just got a used Titan scroll saw. Everything works fine except the fact that the blade is tilted left-right 3-4 milimeters. This makes it very hard to cut with.
Any help would be appreciated.

Thank you,
Adrian

 

[dizjasta]

Hi Adrian. Set the table perpendicular to the blade and adjust the pointed indicator to the 0 degree setting on the table adjuster gauge/locking part.

 

[user 42626]

Hello Adrian
Can you post some pictures showing the issues
Definitely set the table to zero but if blade run out left/right then possible arm or pivot issues.
I'm having to guess with lack of info
Put a piece of masking tape on the table and mark the blade alignment.
Now manually crank the arm if possible to visually see how much movement is occurring.
I refurbish and sell Hegners but this is one of my checks.
As you can see its a thorough rebuild and cheaper than buying a new one

 

[AdrianBaluta]

Finally got time to do some checking.
I set the table to 0 degrees. The left-right movement seems to be very small. In the last photo you can see the angle.

 

[loftyhermes]

The table just needs adjusting the 2 degrees.

 

[AdrianBaluta]

So maybe our problem is that we jumped straight at cutting 50mm thick wood without any experience .
We try to cut pieces similar to this:
https://www.curiostudio.co.uk/product-page/mouse