Search results

One for those that block every orifice around house up and live in high Quartz/Granite areas to be mindful of!

Looking for depth and fence with bar for a 78 plane or one or other as found one bit but not other on some 78's for parts.

Need to see base and bed it sits on ideally also.

My Weapon of mass Destruction with three coats of Tung Oil

Hi Welcome

Hi welcome

Always put some thick grease inside so lubricates hammer/anvil action. Have same one had it years loaded up chuck bit when got and still working well

A good one to clean dirty tools up with is Comma Hyper clean rinse of with hot water well i do leaves all clean and shiny but leaves an anti corrosion coating on it

Try posting some pics that way others can see if anything is compatible/works/fits/helps!

One Years Warranty on products in the UK by Default! Take end out so can get at where brushes run and clean contacts as get crap in between copper tracks and make sure brushes get enough contact pressure as often arc if not enough contact also check brushes are as good as you say/think! even...

https://www.toolnut.co.uk/collections/spare-plane-parts-and-handles/products/stanley-lever-cap-screw https://www.lumberjocks.com/threads/stanley-screw-sizes-reference.317107/

Put some pics up of it all round inc frog without blade/cap. Later blades have angle marked>in mm's and narrower rounded tops as progressed from what ive found out mind that's if not had bits swapped out! Handles are they wood or resin? There are a few websites that list types and changes mind...

Couple of things to add! Always check dates on abrasive wheels/discs(stamped on metal ring or printed on centre part)plus store cool dark out of moisture/sunlight etc! "Legal H&S requirement on site/trade/employing anyone" Why you need a ticket for abrasive/cutting wheels.(DIY you can't sue...

Your lot looks a bit like mine have similar wooden coffin plane plus i have a long one like a 6ish.also have similar plough/combi plane. I bought a job lot which they came in with a boxed no3 plus coping saw old fret saw.record 043 cutters.old Stanley ratcheting brace plus a load of other bits...

5 1/2 is a late one "Ribs on bed".silvery fixings and wheel are later issues compared to brass. No7 is that a USA made one? looks good check around mouth/sides for hairline cracks it is a later US one which should have thicker sides and better casting than ancient ones!. Blade looks good wider...

Hi Welcome

Hi Welcome

Hi Welcome. Might be moving Dorset/wilts way?

Hi Welcome

Undo nut holding bar if can't see details as stamped on bar type.pitch.Gauge. To set bar/chain tension is. with nuts/holder? slack'ish with two nuts back one loose front just slightly snug so not sloppy.Rest end/tip of bar on something so supported which gives longest working length! ie chain...