Search results

Very nice Bob - all done by hand too. Cheers IAn

Many thanks for the link - can you tell me how the system works and how it is connected? also does it use much electric? cheers Ian

Anyone have any links to the air to air system they are using? cheers Ian

I had an axminster white palm sander and it was bloody terrible - the vibration was so much I wouldn't put it any where near my boxes, it now sits in the corner gathering dust. Best Ian

Wow Craig your pulling my leg first box - if this is your first box you and Andy (seeing his latest box) are set to be masters in no time. Well done, and remember mistakes will always be made - its how we learn and the next box gets closer to perfection. Cheers Ian

Jen nice box with crisp workmanship. Well done. Best Ian

The Aximinster range is very good and to suit all budgets. But for bandsawn boxes go for one that has a good blade guide system like the bearing guides or euro guides. http://www.axminster.co.uk/bandsaws--wo ... 13017_pg1/ hope that helps Ian

Very nice Brian - is that elm? Ian

Many thanks guys - I have some asbestolux I could use but will look into the double walled pipe tomorrow. Cheers Ian

Hi All Has anyone added a stove to a wooden workshop? I have just got an a finishing shop built behind my current workshop and I want to put a pot belly stove in it, I want to run the pipe out and up the side of the wall but what do you surround the part of the pipe that goes through the wall...

Thanks DW - I will wait to see if anyone else has any solutions before looking at the forum cheers Ian

It has but it is set to high

Hi All When I turn on my bosch router it runs fine but after about 1 min it speeds up. Replaced the brushes but still happens. Anyone know what the fix might be? CHeers Ian

I've had loads of issues with me Metabo ROS - first it was the vibration and had to be sent back, now the speed adjustment won't work. I know this does not help your problem but just had to let that of my chest. Ian

Very nice Mark! - anytime I run into to problems I show it to the wife and she usually has the anwser (maybe she should be the box maker :) cheers Ian

Hi Craig Instructions supplied - I use the router table with a 9mm bit for the strike plate and it works fine, the case can then be drilled out with a 7mm drill bit and cleaned up with a chisel. Cheers Ian

Cheers DW very kind words. Best Ian

Thanks All. Cmwatt - the black is dyed Bolivor veneer. The marquetry is laser cut and then inlaid by hand. Below are some larger images. I am currently working on another 2 for Aryma only with different pictures and background colours, one of which will be going to some quite special. Cheers Ian

Hi All This box was specially produced for Aryma, the creators of the realistic fuchsia marquetry used on the lid and box front. The interior has been finished with sawn Native Sycamore veneers and the matching Sycamore single tray is lined in rich red suede. The striking colour combinations of...

Ok Jim will have to think about this. best Ian