Search results

Depending on what type of wood you are looking for I use Mcgregor & Son in Belfast 028 9045 1244 for imported woods like walnut,oak or maple Or if you want some local woods like Yew or sycamore I use http://www.wood-shed.com/index.html Sams his name and woods his game. He mostly does woodturning...

:lol:

Pretty darn good for a 9 year old ! Cheers Ian

No problems Andy - for years I used the rolls stuck down until axminster starting supplying these. Cheers Ian

Hi Andy You can get drum roll here http://www.axminster.co.uk/hermes-sandi ... 32c30c2e5a which can be cut to open it up. Cheers Ian

Hi Ian No gluelines where the best - I have used them before for the 5 minute stuff but was just checking to see if anyone knew a cheaper supplier. Cheers Ian

Thanks I placed an order just before the holidays. Cheers Ian

Thanks guys. Matthew I sent you a PM not sure if it got through let me know. Cheers Ian

Great looking shop and great looking tool collection! Cheers Ian

Very neat! Cheers Ian

Nice and chunky. Great job! Ian

Anyone have a source for cheap Z-Poxy finishing resin? Cheers Ian

Ok this is what if found out and you were right. The ply wasn't flat to start of with, I had found that sometimes I was getting flat results and sometimes not. The reason for this was that sometimes I had placed it into the press concave up and sometimes down. I pressed a piece that was warped...

I do run the veneer 90 degrees to the ply grain. I have a few things to try and will post my findings cheers ian

6mm birch ply

Thanks Jim quite interesting. Yes I agree the pressure is to the outside first and is causing issues. I will try what Jason said regarding some material the same thickness around the outside to so it gets the outer most pressure. cheers

It has been balanced by veneering both sides. I had a thought that if I reduce the pump pressure this might help. I will have to test that out. Cheers

Hi I was hoping someone might be able to help. I have a frame veneering press, which has a suction hole at each end. The bed is flat but when I veneer a panel and put a ruler across it looks like this at the ends (the ruler is pretty straight). I do use a breather fabric My thoughts are...

Hi Luca I found your site to be very helpful. Its layout is nice and clean and uncluttered. I have bookmarked it. Cheers Ian PS try not to go down the route of lots of ads it will only spoil the design and to me that is what is going to make me stay and come back.

Thanks all I've ordered some so I do some tests. Cheers Ian