Search results

Bad pic sorry! Here is some more which should show better! ...and some showing the the 'stop' plate, which I feel has a definate stop when it hits the opposing plate! This pic shows position when blade is at max cut!

Mea Culpa! I have found the cause of yours truly 'bending' that strip of metal (and hopefully the answer!). See the pic and notice a small gap of about 5mm where the corner of the top right metal plate 'parks' itself when the blade drops below the table! You will notice right on the corner that...

Thanks Eric.... I found the post...exact same problem!...however, I think I've found the cause...ME!!! I foolishly thought I could get away with using a lovely unused Freud 210 dia. blade, and was so pleased when I saw it disappear beneath the surface of the table...never realising thet I was...

Still in the process of tuning my TS200...mobile base frame now made and saw fixed to it..also having just fitted extension fence rails and now in the throes of making and fitting a piece of worktop instead of the metal tray which comes with the kit! I removed one of the side panels to gain more...

I favoured the long rails and the longer fence...quite happy with them so far!!

Now I,ve sorted the extension leveling, I don't like the horrible grey cold sheet of metal anyway (I'm a fussy old git!)..so I have a nice piece of white worktop that I fancy using, handy for scribbling on..heh heh! It will leave me short of about 4"...I may chop that off the end of the...

Hi Tomsk, yes finally figured out what the extra 3 nut & bolts were for...just got to work out how they work!!? Is it the extension table that has the bow in it...damage in transit!? Gerry ..off to try fit the ex table!"!!

No shims sent...will make packing to suit!

Hi Tomsk, I've just received the table extension pack for my TS200...no instructions!! I know it should be a simple case to fit onto the existing unit, but to start the fabricated table extension sits about 10mm below the saw table!!!?...so it looks like it has to be packed up on the front and...

Can anyone tell me what the wire mesh is for which came with my TS200? It looks like it sits on the ledge inside the bottom of the sawbench, I can only imagine its to catch larger bits falling through...so far I've not used it!! Gerry

Can anyone recommend a courier that they've used to collect an item from New Forest area and deliver to West Yorkshire? Thanks Gerry

Thanks mailee...spotted that..I was meaning members pics of products reviews etc. Regards Gerry

Is there a quick way to view members photos other than trawling through all the topics etc. Gerry

Thanks Steve...I will put something together for now and await your dvd...ps I enjoyed your set I bought recently ...some great tips there!! Gerry

Has anyone managed to design and make an accurate and easy locking rip fence for their table saw? I'm in the throes of fabricating a surround for my Axi Ts200 and stupidly bought the Axi aftermarket bandsaw fence!!! (..anyone interested!!?) I would need to do a lot of work to get it working to...

Has anyone bought a mobile base like APTC sell...wondered if they were worth the money...I've made a couple myself, but thought maybe these bought ones might do a better job----Quicker!! Thanks for any advice

Does anyone know where to get the sticky back tape measure for making your own measure stick/jig.

Has anyone designed and actually built their own workshed/shop. I've had numerous gazebos blown from my driveway by strong winds over the past few years which were handy to work under mostly in summer. I already have a 9 x 6 custom made flat roofed 'barrel board' shed at the top of my drive...

...thanks everyone! having taken onboard your most welcome advice I have just taken delivery from Rutlands a Dakota deluxe router table (down from £199 then £149 to £99!!) ..it looks the business (for the price!!) and looking forward to setting it up with my new Freud 3000!!

Thanks Steve... I have access to a lathe...not a problem! I assume the router base plate remains on the router when fixed to the plate..therefore clearance holes must be made in the base plate!! Am I right?