Search results

i think for £60 you can take it higher court and then they will get the enforcement officers to chase down your money and they have a legal charge to to get your money, as on the tv, they are very good at what they do and know the law, i would think they will get your money but it is £60 quid...

hi there are a lot of reasons first how much paint are you putting on maybe spray heavier coats or spray first coat of base coat leave it to set then spray base coat again if you look in to the light as you spray you should be able to see the paint as you spray it needs to lay on the wood and...

hi you can walk in and open a cash account all you need name address and phone number,the paint you ask about i think gets made at stockport not sure if there would be minimum order . hope this helps google your local branch and just ring them and they are normally helpful.

if the doors would be to small why not put a face frame onto the cupboards that would cover any gaps as you can make to sort door sizes. cheers pip

i bought these last time they were on offer and i have just ordered some more i find them very useful ,they are not the best as they have a fine screw not as course as record the holes are a bit tight in the bars but i would still buy more( i have). cheers pip

hi the way to check the lathe is not out of alinement is to put a drive centre in the head stock and push the tail stock up to it and it should touch tip to tip i think you can adjust the head stock if it does not line up so you can make it line up. pip ps is that the tail stock in picture...

hi check out ebay for small sheets of stainless steel it would not be very big should not be to pricey pip

hi i have an airshield it is well made but it is difficult to get to fit tight on your head to stop it sloping about with out hurting your head it does keep the dust away from your face i used it for a day the first time and was surprised the amount of dust on the filters (witch i was eating...

very nice another top project pip

hi i meet you a while back when i collected some of your spare timber sounds like things are on the up i hope things go well for all the best for the future =D> =D> =D> pip

hi i know how you feel i got done doing the same ,i know what you mean about watching the speedo i was glued to it when i got done but in time you start to go back to your old ways . i was well p***ed when i got done . since then things have calmed down and touch wood i have not got any more...

well aaron you not a total novice now but you have a long journey ahead of you good luck. you will find when you use better wood you will find it easier to finish the wood as balsa is very soft and is difficult to sand because it has open pours and that will make it hard to finish to .you will...

very nice all you need now is a bike fan and you have a buyer :mrgreen: pip

hi dr phill i don't think the others have read what you wrote i would not be surprised if you have to put a foundation in and build your piers up from that it depends how big the base is for your old fire place and weather you will be within the same area but they are right you need an arc or...

seems to have hit a bit of a nerve , (hammer) just to put my side i bought the saw second hand as i said it must be more than five years old I was pleased that ax could get the parts 8) , they said 12 weeks but took about 8/9 weeks( which is the way like to treated) not being told they will be...

oohh some people are so touchie, the parts came from abroad and was told up front how long they would be, and they came early !! i did not check the make of bearings, but the fit was much tighter fit and all parts fitted together and were spot on very happy with the service and the parts . i was...

hi i bought a ts200 saw second hand a year or so ago all seemed well for a while then i noticed the blade started to wobble a small amount after awhile it got worse so i looked into getting new bearings, so i bought bearing (brand name) striped it down put new bearings in then rebuilt it again...

hi if you can see dpm that goes under concrete you could cut each end lay it down then lay new dpm on top and up in front of door frame and up at ends then concrete with a strong mix and trowl up to finish. once dry trim dpm of then lay carpet. pip ps at least that's what i would do

top marks wish i could carve as good as you :oops: :mrgreen: pip

hi thats what i use 4" soil pipe works a treat, i use flexi pipe with soil pipe cut to fit inside flexi pipe and soil just cut a slice out of the side wall and you have a connector to fit flexi to solid pipe. pip