Search results

They are double edged and the hole configuration depends on the length. 320x19x1 mm would have 2 holes and a slot (most likely) unless they are 3 mm thick which would be different If you give me some more info I CAN guide you to the right place.

Are they the same type as here http://www.barke.de/web-content/eng/pdfENG/Barke-Messer%20EN.pdf

Unless you search at Cutting Solutions where I sell a wide range of German and othe manufactured blades

Starrett make their own bandsaws, holesaws and jig saw blades and have no connection with Freud.

Why put something on thats essentially oversized when there are plenty of 200 mm blades avaialble. 200 x 40T @ £21.00 + post + VAT other tooth configurations are available.....

Ahem.... anyone can buy from me.... I'm not fussy :D :D

Ahem I wouldnt have said if...... I could supply 216 Z=48 which will give you very good finish on all materials. Top quality German blade £22.50 + post + VAT Need to know if its 16 mm or 5/8" bore Doug

Will the machine take a 216 diameter? thats a much more common size. what bore do you need? what material do you want to cut and what finish are you expecting..... all these depend on the blade to be recommended

**** What size are the knives you need? Do they have any slots or seatings for locating in the current machine? Doug

depends on lost of things. blade diameter thickness of mdf single sided veneer or double sided finish required

Jorgoz I "think" the system will still work with 25 mm knives. measure the distance from the bottom of the seating to the outer edge of the block where the knife sits. p111m if you have 260 mm double sided knives thay may well be the barke type already how wide and how thick are they...

I have sold quite a few to people on here and the other side. are the current blades plain knives without slots?? what size are your current blades?

OK. Some of this might sound silly or obtuse....not intended. horrid material to cut but does the job intended. is the blade you are using sharp? blunt blades will encourage build up of the resin which will "melt" onto the teeth and plate. and very difficult to get off. run the blade with the...

I have a 24 tooth blade that needs no bush. Top quality German blade. 1821201 http://www.cutting-solutions.co.uk/3.html

what sort of fire retardent is it? what thickness? what cut lengths? what finish do you need?

Titman have some smaller ones http://www.titman.co.uk/pdfs/2009/P36_37_Tslot.pdf

they should grind ALL the angles of the blade.....many dont and just grind the faces. in the case of the triple chip blades they actually have 4 places to grind. two bevel & one flat on the top plus the face. and the "triple ground" blades are not special. most saw doctors have automatic...

Yep they do. In "Product & Range" kerf 2.75 mm plate 1.75 mm Which means no good if you want to use them on your table saw and the riving knife is wider than 1.7 mm and at 2.5 mm deep there isnt a lot of carbide for regrinds. TBH I would be surprised if ALL the blades in the range were the...

whats a pineapple... apart from a very nice piece of fruit?

what material are you cutting which saw blade are you using (number of teeth and diameter) is the blade sharp?