Search results

Shop deals on ebay
UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. O

    shed floor

    Non of the above sawdust makes floors slippery, chipboard works.
  2. O

    Help on bench height please

    I also have back problems and read a tip that the height should be at watch level .Stand by the bench arm by your side height of watch from floor is level of bench top .I had to lift my bench 4 inches but it works fine for me and remember you can make a low platform to stand on if you need to do...
  3. O

    Extended ring main

    Most important is to check that the correct size cable has been used and wired correctly. metal boxes etc connected to earth and sleaved , check regulations for floor area of modified ring.Are the things that spring to mind.
  4. O

    Very Disapointed.

    I have heard good reports on the Delta performance but could never find a source of spares (blades) so have always given them a pass.
  5. O

    (Thicknesser) Timber pulling sideways

    Have you waxed the bed it makes a big difference.
  6. O

    help with Excalibur Osborne EB-3 Mitre Guide

    Twenty one and a half inches and eleven and five sixteenths (includes grip paper ).
  7. O

    How would you make this cut?

    Anything in this list help. http://www.wealdentool.com/acatalog/Online_Catalogue_Single_206.html I seem to remember using these cutters to make a finger hold.
  8. O

    £5000? How to get a good return?

    I go to Martins money site to find the best returns .Does she need a ISA or is her tax situation such that she can get a better rate and fill in the form.
  9. O

    Electrical Wiring - Gremlins (Help Required).

    Reading the above, if the in line resistance is the device its self, then a capacitor across it should kill the volt drop and stop the flashing. reducing the the exposure to induction may be difficult in practice and the problem may come back after further wiring alterations. Your voltage test...
  10. O

    "Utilitarian" Workshop: Design Advice Sought

    'shiplap, breatheable membrane, 11mm OSB, insulation between studs then a lining inside'. Sounds good, you could go down to 8mm osb for walls and CLS for studs .
  11. O

    Electrical Wiring - Gremlins (Help Required).

    Putting the meter across the toggle switch it reads 205V - whereas an adjacent switch - part of a 2 way switch with one downstairs - reads 240'ish. So how's that for odd? So (using high resistance meter) the switch is o/c. live one side and return via the lamp 'filament other side, ok on one...
  12. O

    Electrical Wiring - Gremlins (Help Required).

    Check the neutral is at earth potential .
  13. O

    "Utilitarian" Workshop: Design Advice Sought

    I would just make a custom shed with a window from ebay (odd sizes very cheap) and a felt roof.All set on levelled up blocks or well fixed slabs foil backed insulation well fitted between studs if required.
  14. O

    Garage roof covering

    I recommend Wickes top coat fitted on a warm day, however the first coat will make it water tight.
  15. O

    "Utilitarian" Workshop: Design Advice Sought

    Corrugated sheeting especially clear is bad for condensation when used for a roof it drips on you and items you store.
  16. O

    Help - my chainsaw won't start

    I am with Gerry i have had this fault with a welder once.
  17. O

    Roofing

    Lots of info on this site http://www.slecladding.co.uk/
  18. O

    Electrostatic spraying?

    wood is a insulator.
  19. O

    Raw Files

    Just been through this for the wife who is very good with Photoshop and we got the cs5 upgrade £150 the extra features made it viable for us. extra features:- http://www.youtube.com/watch?v=vfkjHnsAsvg
  20. O

    Anyone know the road from Barmouth through Snowdonia?

    The A498 out of Beddgelert to Capel Curig
Back
Top