Search results

I had a Charnwood router that had a bent shaft from new, sent it for repair and they said no fault found (you could see it and the vibration !)got my money back and they were going to resell it, so that was the last item that i will ever purchase from Charnwood .

I would use expanded polystyrene or kingspan board cut for a friction fit between timbers with a vapour barrier say visqueen then osb sheet this will be perminent and not disturbed by any proposed roofing work. The door well you will have to get creative to stop the drafts with say brush type...

They are personal things to fit you the space available and type of work to be done. Here is a list of books. http://www.bookdepository.co.uk/WEBSITE/WWW/WEBPAGES/search.php?key=workbench+woodwork&by=title&Button1.x=25&Button1.y=10 The Christopher Schwarz book answers all questions. other book...

I think the key here is voltage withstand the telephone cable will not stand 240 volts but it is separated by conduit which will withstand it so all is well. Telephone cable is manufactured to deal with induction from AC by using twisted pairs for the circuits .

Does this help. http://www.westskelstonservices.co.uk/acatalog/sippdf.pdf

Its difficult to see but is the side guides just under the gullet of the blade and supporting it to max effect there is lots of adjustment available once the blade is centred on the wheels position the guides then set the back guides if this is not set up the blade will twist and wander.

Clean wheels fit new blade 'important' I like 0.5 inch on this saw which I have, set tension check/adjust for central running on wheels. with all guides backed off move 1 top guide to blade check action of height adjustment and adjust for best then set guides up to hand book and check table for...

Aldi/lidl digital caliper measure slot to blade front and back and adjust framing square for 90 deg..

Have you considered the plastic mesh covers for the gutters the moss that washes down is stopped by them and water flows round them. http://www.toolstation.com/search.html?searchstr=gutter+guard

The dish will point south and is aimed quite high in the sky although is may not look like it is so the shot may not be affected by nearby trees. a dish pointing at the sky astra sat. will receive freesat giving the same channels as freeview plus bbc high definition dishes can have 4 outputs...

Sent as two emails AVG found a virus win32/heur and stopped it, so DO NOT OPEN THE LINK.

I think you treat the hammer fixing as a nail so its hard to remove but the frame fixing is screwed in so can be removed and plastic sleave cut to remove frame.

I have purchased knives for my SIP about £7 i think you could then have them surface ground to your requirements.

The terminals on the switches are large enough to take 25sqmm which is used for meter tails.

Yes. i feed my shop with 2x 2.5mm t&e cable as i got machinery i added the extra cable.They are between the two distribution boards so share the feed current.

I expect you have a drum of cable so if you have volt drop problems make the feed into a ring so thats two cables at the feed end, each feed the current will be shared so its like a 2sq mm feed.

I was going to point out that there is a felder bandsaw for sale on the woodwork uk forum but i notice you are in france.

That sounds like bull make a claim for the damaged equipment from them.

I have freeview but had to have a adjustable 4 way mast head amplifier fitted to distribute it around the house it all works fine we are on the edge of transmissions areas and have scots pine trees near to our ariel. The installer tests the ariel for time outs on various channels to check...

Could be a list of url's of 'up link' sites then watch on computer.