Search results

Make sure you can get abrasive loads at a fair price i had to get mine from USA for the Delta when the pound was up. The side mounted belt sander :- i have a aldi one fixed to a wood frame that is held in the vice it works well at low cost.

Try the ideas on this link that you have not done yet, I thought the disc repair could be useful. http://www.microsoft.com/atwork/getstarted/speed.mspx

Castors http://www.tooled-up.com/Product.asp?PID=19890

When you buy a CMT blade there is a diagram on the box showing the various angles the teeth have to be done at its complex, so i take them to the hire shop for a 7 day turn around . If that time scale is no good have two blades then there is always a sharp one to hand.

The zip application puts stuff in internet explorer which is easy to disable in vista but its not wanted (yahoo + smartshopper) Yes i know.

See link on ebay and its free + felling costs UK ebay link

I have the sip table saw and have it on wheels with a out feed sheet/table hinged and cut to clear the floor when down. I just position the saw fold up the table and put a roller stand under it works fine for me just a little difficult to arrange the fixing of the hinge but it only done once.

Yes Axminster tools just got a chain for my fox m/c fitted fine.

Some water collectors have a float operated switch to stop the m/c when full, is it there,in correct position, stuck etc.

RobertMP In the past i have found the art of spraying and the gathering of information about it very difficult to come by. I have asked here for info and got only general stuff, this thread has been very helpful and you have been very open and i thank you very much, I think if i had your...

When i looked into the size of table saws and the space required i found it very difficult as the advertising spec does not give the full size info all tables rods and carriages etc i ended up asking members what space there m/cs required and promptly dropped the idea of a sliding table.How ever...

I agree with waterhead37 sliding tables and outfeed space eat up work space. Do you have double doors and a level hardstand in front, with the saw on castors sheets could be cut outside,but slide table takes up space when parked. Or no sliding table, cut sheets up with circular saw and finalise...

I used to turn years ago and found it very difficult, getting a good finish especially on end grain and producing a good cut that required minimal sanding and crisp profiles was especially so. If you are doing this you are turning well.

Phone record my fence did not lock firmly needed 20p part they sent a new fence compleat 0870 770 1777

Aldi if they still have them just program to come on together. http://uk.aldi.com/uk/html/offers/2867_7876.htm

Having recently extended my workshop i used visqueen dpc under the slab and t&g chipboard floor glued tenons over it, after it was dry .Its fine m/cs move easily and it is easy to clean it can be sealed or painted if required.

This works for me. http://www.axminster.co.uk/product-Trend-Trend-Depth-Gauge-22144.htm

http://www.google.co.uk/search?hl=en&q=marking+knife&btnG=Google+Search&meta=cr%3DcountryUK%7CcountryGB

Single bevel its more accurate but you may need both left & right knives.

Just the thing to switch dust extractor and compressor. http://uk.aldi.com/uk/html/offers/2867_7876.htm