stuart little
Established Member
Hi guys, the time has come to have me a sort out of kit that is now virtually redundant. I am offering the following:-
AEG 18v Combi-drill, w/charger, 2 x 1.5ah, 1 x 3ah Li-on batteries. It's not had a hard life, used mainly for drilling walls for plugs as it is pretty powerful. Offers around £85, post £10 (5.8 kg). Or collection from HR9
DeWalt DWE 576K 240v circular saw w/ track base (making this dual purpose) + 2 x 1.5m DW track + joining bar, 2 clamps, & bag, also track router adaptor for DW625 etc (somewhere I may have parts for other makes, but they elude me). This would be collection only because @ 1.5m long, shipping becomes a rip-off at £30 - £40 for the rails alone [5.5kg]) Looking at offers around £275.
My 'Shop-Built' router table:- It is complete with Triton TRA001, w/1/4, 12mm,& 1/2" collets, mounted in a Kreg Insert kit, UJK fence, UJK fine adjustment, UJK brass screw-in guide bushes (Leigh style) and a collection of cutters, mainly for mouldings & jointing. O/A size 32" L x 22" D x 37" H. Mounted on rubber tyre, braked swivel castors, on steel mounting angle plates. Plus 2 x Jesem feather boards, + 1 UJK feather board. Shop-made coping sled, also inc. Obviously, collection only, & would probably need 2 persons. (I'm not very fit to lift heavy stuff).
What's it worth, I wonder? To buy all the parts to make today is approx., £425. As for the cutters - 'Dunno'. See photos. The cutters are mostly Tornado (Blue), from Rutlands, & Yonico (yellow), these were mostly from the USA, prior t6o evertthing going South. I have got on well with both makes, using them 'sensible'.
All I can ask is "Sensible offers, please".
A bonus with collection is a day out to the wonderful Wye Valley, with it's 'Shicken-chitty' river!
Loads more photos available, 10 max at a time.
AEG 18v Combi-drill, w/charger, 2 x 1.5ah, 1 x 3ah Li-on batteries. It's not had a hard life, used mainly for drilling walls for plugs as it is pretty powerful. Offers around £85, post £10 (5.8 kg). Or collection from HR9
DeWalt DWE 576K 240v circular saw w/ track base (making this dual purpose) + 2 x 1.5m DW track + joining bar, 2 clamps, & bag, also track router adaptor for DW625 etc (somewhere I may have parts for other makes, but they elude me). This would be collection only because @ 1.5m long, shipping becomes a rip-off at £30 - £40 for the rails alone [5.5kg]) Looking at offers around £275.
My 'Shop-Built' router table:- It is complete with Triton TRA001, w/1/4, 12mm,& 1/2" collets, mounted in a Kreg Insert kit, UJK fence, UJK fine adjustment, UJK brass screw-in guide bushes (Leigh style) and a collection of cutters, mainly for mouldings & jointing. O/A size 32" L x 22" D x 37" H. Mounted on rubber tyre, braked swivel castors, on steel mounting angle plates. Plus 2 x Jesem feather boards, + 1 UJK feather board. Shop-made coping sled, also inc. Obviously, collection only, & would probably need 2 persons. (I'm not very fit to lift heavy stuff).
What's it worth, I wonder? To buy all the parts to make today is approx., £425. As for the cutters - 'Dunno'. See photos. The cutters are mostly Tornado (Blue), from Rutlands, & Yonico (yellow), these were mostly from the USA, prior t6o evertthing going South. I have got on well with both makes, using them 'sensible'.
All I can ask is "Sensible offers, please".
A bonus with collection is a day out to the wonderful Wye Valley, with it's 'Shicken-chitty' river!
Loads more photos available, 10 max at a time.
Attachments
Last edited by a moderator:
