wanted help/info on panel saw startrite ta300ps / ta1250

[r1chard06]

I have got this saw and there are parts missing wich I am going to try and get but don't no qwite were they go as on parts list pdf you are looking at them from the wrong side as anybody got this saw or the ta1250 that would take me some pictures of were they go its all to do with the scribe blade the complete belt tensioner unit and idler unit are missing any help much apreciated

 

[ColeyS1]

Ta300ps if anyones wondering what saw ;-)

 

[r1chard06]

yea that's right ta300ps sorry

 

[misterfish]

Is this of any help http://www.daltonsmachines.com/uploads/ ... s_List.pdf ?

Daltons have a lot of manuals of old machines on their web site http://www.daltonsmachines.com/downloads-old.html

Misterfish

 

[beech1948]

Sounds like an old saw and not current models.

I suggest you try these

1) Call Startrite and see if they have anything from manuals to spares. Possibly not but it's worth a phone call. They may know who has these
2) Call http://www.altsawsandspares.co.uk/ as this was the company I think Startrite disposed of their older spares stock too. Thery are very approachable
3) Consider trying to find a beat up spares and repair machine cheaply and use it to rob the spares from...sell off the rest

Al

 

[deema]

Startrite when it was sold off was broken up and the spares division was sold to
www.machinespares.net

They are really helpful and very knowledgeable. I have bought spares for a mercury drill, bandsaw and a new arbour for my table saw from them. They often have old machines that they are breaking up where you can get bits and pieces quite reasonably. They also have new parts to the original drawings. However, because to low volume I assume, prices are expensive.