Wanted a table adjustment wheel / handle for a Kity 635 planer thicknesser

[jon j]

I am looking for a table adjustment wheel / handle for a Kity 635 planer thicknesser or something i can modify to do the job any help would be great

Thanks Jon

 

[Alpha-Dave]

Looking at the manual for my old Kity 636 there are 3 different wheels you could be referring to (although the bed-raising one for the thicknesser is the only one designed to be taken off) so I expect the 635 to be similar design. It might be easier to say what fitting the wheel has to adapt to: e.g. an 8 mm splined shaft or a 10 mm square drive, etc. As it is made in France it will certainly be metric.

 

[Duncan A]

Anything here which would do the job?
https://www.rdgtools.co.uk/acatalog/Machine_Handwheels.htmlDuncan

 

[powertools]

I think that an 8mm 1/4 drive deep 12 point socket will fit. It must be 12 point and deep.

 

[Lons]

WDS Components have a large range of handles.
https://www.wdscomponents.com/en-gb/machine-hardware/hand-wheels-grips/c-286

 

[Chippymint]

What's wrong with the old one Jon?