I’m selling a few bits, having a clear out of some of the stash of parts @Sideways and I have accumulated restoring machines. The first is a complete fence unit. I have to say that @AdeB has first dibs on this part as it was his thread that stimulated the sale of this part. So, it’s a complete fence, with all the bits. It’s a little shabby but works as it should. The long nickel plated fence itself has some dents on the side that isn’t towards the blade, but the working side looks straight. I’ve taken off the wooden fence it had so you can see it. The dents were caused by over ambitious tightening of the screws that held it on! This is typical for these fences. The locking handle is bent, but could be straightened with a bit of gentle tapping.
The best bit is that the micro adjust looks to be almost as new with almost no signs of wear. These are usually badly worn and are very expensive to buy as a replacement (£142.80 delivered from Advanced Machinery).
The castings are all perfect, no cracks or damage.
Sorry about some of the photos, not sure what happened, and I can update them if required. Collection preferred, but can ship at cost, not sure how much that would be, but a quick look at Parcelforce suggests around £20. You can of course arrange your own currier to collect.
Located CW6
Im looking for £100
The best bit is that the micro adjust looks to be almost as new with almost no signs of wear. These are usually badly worn and are very expensive to buy as a replacement (£142.80 delivered from Advanced Machinery).
The castings are all perfect, no cracks or damage.
Sorry about some of the photos, not sure what happened, and I can update them if required. Collection preferred, but can ship at cost, not sure how much that would be, but a quick look at Parcelforce suggests around £20. You can of course arrange your own currier to collect.
Located CW6
Im looking for £100
Last edited:
