Using a drumsander

[Rustic Mike]

This is the stuff it last ages and bring it back to nearly as good

 

[SkinnyB]

If you attempt to use the whole 115mm width you'll find that the tail is not in the right place for the anchor. Some months ago one of our members overcame this by cutting a new slot in the cylinder and repositioning the gripper. I think I'd rather have a 40mm roll available! I'm fortunate in having rolls 150mm wide which I split down the middle.
Brian

Here you go:
http://skinnerdesigns.blogspot.com/2017/02/jet-22-44-plus-drum-sander-modification.html

 

[okeydokey]

I have heard, but never tried, a piece acrylic or poly sheet/block may be used to clean out the resin. The rubbery thing used to normally clean the sandpaper with sawdust is called a belt dresser. An old trainer can be used and so can the plastic type wine corks but the dresser in my opinion does have the edge on the others. I only drink wine that comes in corked bottle because I found the metal ring left behind on the screw top bottles can cut my lips.

Gary.

HI
Try a straw

 

[Sachakins]

A piece of pvc waste pipe also works well.