unidentified jaws

[Phil Pascoe]

Any ideas what chuck this jaw would fit? There's no centre line hole for slide fixing.

 

[Orraloon]

Pin jaws but not sure what make. Had a look at my set for the nova chuck so not for that one.
Regards
John

 

[ChaiLatte]

Pin jaws but not sure what make.

Look closely at the photo, specifically the fixing holes and think about how they could bolt to a master jaw.

The ones pictured are on the same pitch circle.

Every other one you see has holes in line with each other, with the projection of that line intersecting the centre of the chuck.

 

[TRITON]

My my, what lily white hands

 

[Paul Hannaby]

I remember having something similar on an old craft supplies mini grip chuck. They also made a maxi grip chuck which was a similar design but bigger. What's the outside diameter of the jaws?

 

[Robbo3]

Record jaws have a raised tenon to fit a slot in the carrier whilst Axminster jaws are the opposite.

 

[Phil Pascoe]

Yes, I use Axi jaws and used to use Record/Nova jaws. These are different, the mounting screws aren't on the centre line of the jaw.

 

[Tris]

Think Paul Hannaby has it. The pic in this link isn't the best but looks like yours on the upper right

https://www.martinsbootfair.co.uk/prod_desc_MAXIGRIP.html?sno=298

 

[Phil Pascoe]

Problem solved, thank you.

 

[woodbutcher2]

Oneway ?

 

[Inspector]

Oneway ?

Nope. Oneway jaws have the screws on a line out from the centre not in a circle.
https://oneway.ca/products-category/chucks

Pete