Wanlock Dod
Established Member
I've just finished making my first hardwood project, a kitchen table in sycamore, which has taken quite some time. I've now started to finish it with tung oil and have put on the first coat, thinned to about 50% with white spirit. It seems to have dried OK, and perhaps a bit quicker than I may have expected, perhaps this an effect of the thinning.
Should I rub it down before I put on the next coat, and indeed between every coat. If so should I sand it or would a quick rub over with one of those pan scourer type pads be adequate?
Many thanks,
Dod
Should I rub it down before I put on the next coat, and indeed between every coat. If so should I sand it or would a quick rub over with one of those pan scourer type pads be adequate?
Many thanks,
Dod