Travel Tool Chest / Workbench

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That's both amazing and inspiring. Thanks for sharing
Thank you
Having been slapped on the wrist myself - have you got a way of strapping it down - threading the seat belt through the box? One emergency stop (or worse) and the box could take off at 30/40 mph and cause a lot of damage to you or your tools. Would hate to see those beautiful planes ruined by a pothole or a puncture.
When I took it away last time I put a seat belt around it and that seemed to work okay (I tried tugging sharply on the box and the seat belt lock engaged). Hopefully that will be sufficient.
A first class bit of work. Well made, practical and looks bleedin great.
Regards
John
Thanks John
 
I just love this idea of a shed in a box! Some excellent design work here, lots of clever solutions to make work more enjoyable. Chapeau!
 
Beautiful result, and superb idea originally.

If mine, I wouldn't dare actually use it....
 
I haven't posted anything on here for a while, but I thought some people might be interested in an update on the travel tool chest / workbench.

I've just got back from two weeks' holiday in Brittany, during which we had quite a lot of time spent at the cottage (as my other half is recovering from a broken femur). All that time at the cottage meant I could spend some time making boxes and trying out the tool chest's workholding features.

Since I originally posted the tool chest on here, I've 3D-printed drawer liners for all the drawers to hold the tools that I want to take with me when travelling and to stop them knocking against each other and damaging sharp edges etc. There are a couple of photos below; to see all the drawer liners and read about the process of designing them, have a look in the tool chest build log on my website (the bit about the drawer liners starts on page 126 of the build).

L301_measuring_tray_800.jpg


R601_router_plane_drawer.jpg


During the holiday, I made four boxes which you can see in the next few images.

The first one was made from Oak, with Red Oak for the liner and the splines. I mainly made it to test out the mitre shooting capability of the shooting board integrated into the tool chest:

2024-09-28-oak-box-open_800.jpg


2024-09-28-oak-box-splines_800.jpg


I made two simple tea caddies, one out of cherry and one out of American Black Walnut:

2024-09-28-caddies-closed_800.jpg


2024-09-28-caddies-open_800.jpg


Finally, I made a box with two drawers. The body and the drawer knobs are American Black Walnut, the back of the body and the fronts of the drawers are Maple and the drawer sides, back and bases are Sweet Chestnut (which I mainly used as I had a lot left-over from making the chest). The knobs were made on my home-made lathe after I got back home, so it isn't strictly completely made using the tool chest.

2024-09-28-drawerbox-06-finished-1_800.jpg


2024-09-28-drawerbox-07-finished-2_800.jpg


I wrote quite a detailed description (with lots of photos) of how the boxes were made and added it to the end of the tool chest build log. If you're interested, it all starts on page 130.

A few random images of the chest in use, in no particular order:

Planing a bit of ABW:

2024-09-16-24-more-planing_800.jpg


Using the vice to mark out and cut tail sockets for dovetail joints:

2024-09-16-15-marking-pins_800.jpg


Ploughing a groove with the router plane:

2024-09-16-20-ploughing_800.jpg


A lamp clamped onto the back to help with visibility on a rather overcast day:

2024-09-22-01-clamped-lamp_800.jpg


Adjusting and fitting the inner shelf of the drawer box:

2024-09-16-26-trial-fit_800.jpg


All the pieces of one of the tea caddies ready for assembly:

2024-09-22-03-cherry-bits_800.jpg


Using my home-made block plane with the mitre shooting feature of the shooting plane, when making the small oak box:

2024-09-14-08-shooting-mitres-2_800.jpg
 
Thanks both. @Dan Adamson, I started mid-2020 (Covid pandemic woodworker!). Initially it was mostly power tool stuff (table saw, router etc), but I've since sold the table saw and I think my woodwork has come on leaps and bounds since I did that as it forced me to find ways to do things involving a bit more skill and a bit less "the jig & the machine will sort this out". I've been doing metal work projects since 2012.
 
What a fantastic piece of work, the amount of planning ahead of time to design and build something that detailed must have been extensive. To be this skillful after only 4 years is remarkable.
 
Back
Top