Tormek Supergrind 1200 water through replacement

[adrspach]

Anyone knows where to get one in UK. I have tried google something out but only hit was in US or the bigger versions of it. Or does anyone know for sure that the bigger 250 version fits?

 

[bjm]

Know anyone with a 3D printer?

 

[Max Power]

If it does fit I've got one

 

[adrspach]

I do have someone (hopefully with 3D printer large enough. Any of you have a program or scan for one of those that i could have to try?

 

[adrspach]

I will also explore possibility is someone has it relatively close to Bedfordshire to borrow and scan it somewhere to have it printed.

 

[bjm]

I've not used it but this website keeps cropping up in relation to models for 3D printers Thingiverse

 

[Beanwood]

Do you have one that you want to replace, so know the measurements?
I'm sure I've got an old one from a Tormek 2000 somewhere....

 

[MikeK]

Here is one from a vendor in Germany:

https://www.fine-tools.com/Tormek-Ersatzteile.html
Scroll down and you will find the Model 1200. Part number 7 is the WB-200 water trough for €14.50. They ship to the UK.

 

[joel.riley1]

Its already on thingiverse, very easy for a 3d printer to print.

https://www.thingiverse.com/thing:3962736

 

[adrspach]

Thank you guys now I have 2 options to follow.

 

[adrspach]

Unfortunately to buy it from Shmidt is not possible as they would not deliver to UK.

 

[MikeK]

Unfortunately to buy it from Shmidt is not possible as they would not deliver to UK.

I sent an email to Dieter Schmid asking about this; however, I did put the trough in the cart and went through the checkout process using a UK address I know in the Birmingham area. I stopped just short of paying for the order, but I didn't have any problems with the address. Shipping was €12.90 and the VAT was correctly calculated at 20-percent, instead of the 16-percent for Germany.

I was tempted to complete the experiment and place the order, but this would only confuse my friend when the trough arrived.

 

[adrspach]

I went through the same process, put my address in and card details and from there #it would not allow me to do anything further. Oddly enough it was showing me postage only € 5.90.
However it is not all bad as it gave me the parts original number and from that I was able to find supplier here in UK and it should be on the way here hopefully soon. I will report once it is here if it is what I wanted.

 

[adrspach]

Alls good and thank to you and Westcountry Woodworking Machinery I do have now new original Tormek trough which fits.