Stripping down the Reeves Drive on a black and decker bd339 bandsaw

[Piradose]

I have just purchased a bd339 bandsaw and my reeves drive is seized, I have drifted out the pin that goes through the shaft but I can’t get the two pulleys off the shaft. Has anyone managed to get theirs apart. I have squirted wd40 everywhere and had a bearing puller on both the fixed pulley and the sliding one and neither shift. The saw will work but I’d prefer to resolve this issue as it the last thing I need to do to get it fully restored. Any advice would be appreciated.

 

[Piradose]

Update, I heated the pulleys up and using the bearing puller managed to get them off the shaft. 30 mins of cleaning and lubing the mechanism later and its working like a dream.