Having found myself with two saws, I’m keeping the slider, so my Startrite TA saw is for sale, with options on the motor and fence.
It’s in very good condition, with everything moving freely and working as it should. It has had the motor upgraded from its original 1.1kw to 1.5kw/2hp @ 240v (TA275 spec), which will still run of a 13amp plug, and a modern DOL starter fitted. Should you have the electrical output for it, there would be the option for me to supply it with a 2.2kw motor. It will take a blade from 152mm up to 305mm.
Some specs from the manual:
-Cast iron table 710x710mm
-Footprint of the steel body 605x520mm
-Max depth of cut with 105mm at 90 degrees, 75mm at 45 degrees (305mm blade)
- Weight 180kg
Though I have it, I’ve never had the original fence fitted; when I bought it, I was told the fence needed attention, and I never intended using it anyway. The saw is currently fitted with an Axminster fence (which I’ve found excellent) and table extensions.
I also have an alternative Startrite fence which could be supplied instead. So you could have:
1. Axminster fence
2. the original fence (which “needs attention”),
2. a difference style of Startrite fence (single rail)
4. no fence at all (if you’d prefer some other fence).
The saw comes with a selection of good blades, riving knife, crown guard, Kreg mitre fence and some extraction connection bits and pieces.
Collection from Cheshire is welcome, but I’d be happy to put it on a pallet.
£750ono in current configuration
PM me to discuss options.
It’s in very good condition, with everything moving freely and working as it should. It has had the motor upgraded from its original 1.1kw to 1.5kw/2hp @ 240v (TA275 spec), which will still run of a 13amp plug, and a modern DOL starter fitted. Should you have the electrical output for it, there would be the option for me to supply it with a 2.2kw motor. It will take a blade from 152mm up to 305mm.
Some specs from the manual:
-Cast iron table 710x710mm
-Footprint of the steel body 605x520mm
-Max depth of cut with 105mm at 90 degrees, 75mm at 45 degrees (305mm blade)
- Weight 180kg
Though I have it, I’ve never had the original fence fitted; when I bought it, I was told the fence needed attention, and I never intended using it anyway. The saw is currently fitted with an Axminster fence (which I’ve found excellent) and table extensions.
I also have an alternative Startrite fence which could be supplied instead. So you could have:
1. Axminster fence
2. the original fence (which “needs attention”),
2. a difference style of Startrite fence (single rail)
4. no fence at all (if you’d prefer some other fence).
The saw comes with a selection of good blades, riving knife, crown guard, Kreg mitre fence and some extraction connection bits and pieces.
Collection from Cheshire is welcome, but I’d be happy to put it on a pallet.
£750ono in current configuration
PM me to discuss options.
Last edited:
