toolsntat
Yep, I collect tools and tat
I thought I would share with you how I fitted an axle and wheels on my Startrite bandsaw.
Using the 2 bolt down holes a coach bolt was bent to form a hook to hold the 19mm axle. A couple of suitable wheels held on with jubilee clips.
I put a bit of angle bracket on the other end and use a dolly to lift and move around.
Cheers Andy
Using the 2 bolt down holes a coach bolt was bent to form a hook to hold the 19mm axle. A couple of suitable wheels held on with jubilee clips.
I put a bit of angle bracket on the other end and use a dolly to lift and move around.
Cheers Andy
