Sold SOLD.

[Chippyjoe]

Hi,

For Personal reasons I am now about to start selling off the contents of my small workshop.
I will be listing items as I go but have started with some Festool items.

Pictures and prices of everything will be posted but you will have to bear with me on this because I am not the most proficient on the computer side of things, and what has just recently happened in my life I am a bit all over the place at the moment, so apologies in advance.

I will list some of the things that will be coming up for sale over the next few weeks, so if anyone is interested please message me and I will get back to you.
I will start with the bigger bits.

FELDER K700S Sliding table saw with the capacity to cut 8 x 4 sheet material. Year 2020, 240 volt.
FELDER F700 Z Spindle Moulder with electric rise and fall. Year 2020, 240 volt
FELDER F38 Power feed c/w stand Year 2020 240 volt
FELDER RL 125 Dust extractor Year 2020 240 volt

HAMMER A3-31 Planer/Thicknesser with Spiral cutter with wheel kit, Year 2018 240 volt
HAMMER HS 950 Edge Sander with wheel kit Year 2020 240 volt

Lots of 150mm metal spiral ducting for extraction

That takes care of the bigger pieces. I have been in contact with Russell Jones at Felder UK to get some idea of prices from him for resale so have a very good idea what the machinery is worth.
I have the opportunity to sell it on their s/h machinery site but thought I would try it here first.

With regards to the other tools here is a list not fully complete but will give you an idea of what is coming up.

Festool Tracks for track saws, 3.0 metre, 1.4 metre and .800 metre.
Makita hand held planer in a Festool systainer 240 volt SOLD
Festool Drawers x 18
Makita 9403 belt sander in a Festool systainer 240 volt
Makita Router RP2301 FC Brand new, never used in a Festool systainer. 240 volt SOLD
Makita palm sander 240 volt
18 volt Dewalt Jigsaw (bare)
Dewalt DW700 small chopsaw 240 volt
Morso F Guillotine c/w with spare springs and a brand new spare set of blades. Blades in the guillotine are good as well.
Blum Professional 35mm hole jig c/w bits.
Record Power DP58P drill stand full height. 240 volt
Fein Multi in a Festool systainer.
4 inch hand held grinder in a Festool systainer 240 volt
Bosch Profesional jigsaw 18 months old in case 240 volt
Festool Kapex 120 c/w fold away stand and L/H & R/H wing supports 240 volt SOLD
There will be more,Bessey, Record clamps etc.


FESTOOL Domino DF500 240 volt c/w Systainer and also Systainer with mixed Domino's in.
Price £525-00 Collection preferred from Mid Norfolk.

Festool Domi Plate.
Price £40.00 SOLD

Festool OF1010 Router 240 volt
Price £280.00 SOLD

Festool TS55 Track saw 240 volt
Price £225.00 SOLD

Festool EHL planer. 240 volt
Price £150.00 SOLD

Festool CTL 26 Extractor 240 volt (Damage to Hose holder but works fine)
Price £125.00 SOLD

Festool ETS150/3 EQ Sander 240 volt
Price £210.00

 

[Bristol_Rob]

Where are you located?

 

[Bodone]

Hello Chiippyjoe, interested in the ctl26 and the 9403 if you have a price in mind for the two of them?

 

[Spectric]

Collection preferred from Mid Norfolk.

 

[Spectric]

Always sad when you see someone clearing out their workshop because you know some day it will be your turn.

 

[h-magic]

Hi prices missing

FELDER K700S Sliding table saw with the capacity to cut 8 x 4 sheet material. Year 2020, 240 volt.
FELDER F700 Z Spindle Moulder with electric rise and fall. Year 2020, 240 volt
FELDER F38 Power feed c/w stand Year 2020 240 volt
FELDER RL 125 Dust extractor Year 2020 240 volt

HAMMER A3-31 Planer/Thicknesser with Spiral cutter with wheel kit, Year 2018 240 volt
HAMMER HS 950 Edge Sander with wheel kit Year 2020 240 volt


Do you know how much you want for the Kapex 120 please?

 

[h-magic]

I will take the festool planer and domi plate please if you can post them.
Am happy to arrange courier.

 

[Teepeg]

If you could post the Festool OF1010 Router i will take that?

 

[HOJ]

@Chippyjoe If I may suggest, perhaps it may be worth a call to Norfolk Saw Services, in Norwich, as well as supplying new, they buy and sell machinery, may even have a client base that could be easier for you.

I have no affiliation with them other than a being a very long term and happy customer. (family business)

 

[Chippyjoe]

Where are you located?

Mid Norfolk. NR20 area.

Regards,

Mark.

 

[Chippyjoe]

Where are you located?

Mid Norfolk. NR20 area.

Regards,

Mark.

@Chippyjoe If I may suggest, perhaps it may be worth a call to Norfolk Saw Services, in Norwich, as well as supplying new, they buy and sell machinery, may even have a client base that could be easier for you.

I have no affiliation with them other than a being a very long term and happy customer. (family business)

Yes thanks for that. I know the brothers that run the place so could be a good idea.

Regards,

Mark.

 

[Chippyjoe]

If you could post the Festool OF1010 Router i will take that?

Ok Will get back to you on that.

Regards,

Mark.

 

[Chippyjoe]

I will take the festool planer and domi plate please if you can post them.
Am happy to arrange courier.

Ok will get back to you on that.

Regards,

Mark.

 

[Chippyjoe]

Hi prices missing

FELDER K700S Sliding table saw with the capacity to cut 8 x 4 sheet material. Year 2020, 240 volt.
FELDER F700 Z Spindle Moulder with electric rise and fall. Year 2020, 240 volt
FELDER F38 Power feed c/w stand Year 2020 240 volt
FELDER RL 125 Dust extractor Year 2020 240 volt

HAMMER A3-31 Planer/Thicknesser with Spiral cutter with wheel kit, Year 2018 240 volt
HAMMER HS 950 Edge Sander with wheel kit Year 2020 240 volt


Do you know how much you want for the Kapex 120 please?

Hi,
I did say in the opening post that the machinery was to follow on with prices. Apologies for any confusion caused.

Regards,

Mark.

 

[Chippyjoe]

Hello Chiippyjoe, interested in the ctl26 and the 9403 if you have a price in mind for the two of them?

Hello Chiippyjoe, interested in the ctl26 and the 9403 if you have a price in mind for the two of them?

Hi,
I will get back to you on that as someone has shown interest on the belt sander.

Regards,

Mark.

 

[Chippyjoe]

Mike,

Thank you so much for sorting my post out and making it readable.

 

[Wilson joinery]

Hi chippyjoe, how much are you after for the makita router? Cheers Pete

 

[rixarena]

Interested in the a3-31 as well depending on price

 

[Malcolmg]

Hi,

For Personal reasons I am now about to start selling off the contents of my small workshop.
I will be listing items as I go but have started with some Festool items.

Pictures and prices of everything will be posted but you will have to bear with me on this because I am not the most proficient on the computer side of things, and what has just recently happened in my life I am a bit all over the place at the moment, so apologies in advance.

I will list some of the things that will be coming up for sale over the next few weeks, so if anyone is interested please message me and I will get back to you.
I will start with the bigger bits.

FELDER K700S Sliding table saw with the capacity to cut 8 x 4 sheet material. Year 2020, 240 volt.
FELDER F700 Z Spindle Moulder with electric rise and fall. Year 2020, 240 volt
FELDER F38 Power feed c/w stand Year 2020 240 volt
FELDER RL 125 Dust extractor Year 2020 240 volt

HAMMER A3-31 Planer/Thicknesser with Spiral cutter with wheel kit, Year 2018 240 volt
HAMMER HS 950 Edge Sander with wheel kit Year 2020 240 volt

Lots of 150mm metal spiral ducting for extraction

That takes care of the bigger pieces. I have been in contact with Russell Jones at Felder UK to get some idea of prices from him for resale so have a very good idea what the machinery is worth.
I have the opportunity to sell it on their s/h machinery site but thought I would try it here first.

With regards to the other tools here is a list not fully complete but will give you an idea of what is coming up.

Festool Tracks for track saws, 3.0 metre, 1.4 metre and .800 metre.
Makita hand held planer in a Festool systainer 240 volt
Festool Drawers x 18
Makita 9403 belt sander in a Festool systainer 240 volt
Makita Router RP2301 FC Brand new, never used in a Festool systainer. 240 volt
Makita palm sander 240 volt
18 volt Dewalt Jigsaw (bare)
Dewalt DW700 small chopsaw 240 volt
Morso F Guillotine c/w with spare springs and a brand new spare set of blades. Blades in the guillotine are good as well.
Blum Professional 35mm hole jig c/w bits.
Record Power DP58P drill stand full height. 240 volt
Fein Multi in a Festool systainer.
4 inch hand held grinder in a Fesoll systainer 240 volt
Bosch Profesional jigsaw 18 months old in case 240 volt
Festool Kapex 120 c/w fold away stand and L/H & R/H wing supports 240 volt
There will be more,Bessey, Record clamps etc.


FESTOOL Domino DF500 240 volt c/w Systainer and also Systainer with mixed Domino's in.
Price £525-00 Collection preferred from Mid Norfolk.

View attachment 145535


Festool Domi Plate.
Price £40.00

View attachment 145536

Festool OF1010 Router 240 volt
Price £280.00

View attachment 145539


Festool TS55 Track saw 240 volt
Price £225.00

View attachment 145540


Festool EHL planer. 240 volt
Price £150.00

View attachment 145537


Festool CTL 26 Extractor 240 volt (Damage to Hose holder but works fine)
Price £125.00

View attachment 145534


Festool ETS150/3 EQ Sander 240 volt
Price £240.00

View attachment 145538

Hi I will take the Domi Plate if it's still available, would you post this item?

 

[kgill]

Hi I’d be very interested in the Festool Kapex 120! Happy to collect. Also the Bessey and Record clamps when you’re ready.
I’m fairly sure the A3-31is going to be beyond my budget but would be interested to hear how much you’re after.

Many thanks and kindest regards.