Wanted Single Festool connectors for son’s school A-Level project

[sammy.se]

Hi all
My son is working on his Product Design A-Level project, which is about a desk for student accommodation that can be flat packed and reassembled multiple times

He would like to analyse the mechanical festool connectors (up to 10mm) and only needs one of each. I can’t seem to buy them individually.

Would someone here mind sending me one and I will pay for the single item price and the postage?

Many thanks
Sammy

 

[ChaiLatte]

Your description of "mechanical festool connectors" is open to a lot of interpretation.

Please go here and say which ones he is interested in:

https://www.festool.co.uk/accessory/joining/accessories-for-joining/domino-connectors

 

[sammy.se]

Hi

Thanks, this corner connection is the priority:

Corner connection KV D8/50​

https://www.festool.co.uk/accessory...or-joining/domino-connectors/203166---kv-d850



But if any of the others below are available too that would be great!

Centre panel connector MSV-LR32 D8/25 (https://www.festool.co.uk/accessory...r-joining/domino-connectors/203167---msv-d825)​

Corner connection KV-LR32 D8/50 (https://www.festool.co.uk/accessory...ining/domino-connectors/203168---kv-lr32-d850)

 

[sammy.se]

@petermillard I wonder if you can help with this?
I can either buy them or ‘rent’ them

 

[ChaiLatte]

Long shot, I know, but perhaps if your son wrote to Festool UK on school headed email paper, explaining his project (and buttering them up a bit by saying he had researched various connectors and the Festering ones are the best), they might donate to his studies.

 

[sammy.se]

Good idea! Not sure if it will take too long, but worth a shot!!

 

[HOJ]

If they don't, let me know, happy to post you one of these, and I'll throw in the instruction pamphlet as well:

 

[TRITON]

Problem inherent to all reuseable knock down fixings is they eventually become sloppy.

 

[sammy.se]

If they don't, let me know, happy to post you one of these, and I'll throw in the instruction pamphlet as well:

View attachment 192718

Thanks HOJ! Can I please take you up on that offer? He would rather save the time, then writing etc.

I will message you so we can sort out payment and postage etc. Thank you!!

 

[petermillard]

Hi

Thanks, this corner connection is the priority:

Corner connection KV D8/50​

https://www.festool.co.uk/accessory...or-joining/domino-connectors/203166---kv-d850


But if any of the others below are available too that would be great!

Hey Sammy. Apologies - head down and grafting all day. I can take a look tomorrow when I’m in the workshop and see what I have - you’re welcome to anything that’s useful! Were there any other connectors he was interested in?

 

[Ollie78]

I would be surprised if Festool wouldn`t send you a couple out as samples if you gave them a call.
They sent me a couple ages ago and I didn`t ask them, just a promo I guess.

 

[Setch]

Long shot, I know, but perhaps if your son wrote to Festool UK on school headed email paper, explaining his project (and buttering them up a bit by saying he had researched various connectors and the Festering ones are the best), they might donate to his studies.

Even if he can get them elsewhere, a letter to Festool requesting samples would be pretty good addition to the project.

 

[MikeJhn]

If they as difficult to get hold of as it seems you are experiencing, IMO that makes them unsuitable for the application? One breakage and it's goodbye to the desk.

 

[sammy.se]

Hey Sammy. Apologies - head down and grafting all day. I can take a look tomorrow when I’m in the workshop and see what I have - you’re welcome to anything that’s useful! Were there any other connectors he was interested in?

No worries at all Peter! Appreciate the reply. I think a peanut connector would be a great thing for him to assess also - if you have one of those spare? Happy to return it afterwards and reimburse for any out of pocket expenses etc.

 

[sammy.se]

If they as difficult to get hold of as it seems you are experiencing, IMO that makes them unsuitable for the application? One breakage and it's goodbye to the desk.

They are actually easy to buy, but only in bulk (so if the furniture was to be mass-made, it wouldn't be a problem)...

 

[petermillard]

No worries at all Peter! Appreciate the reply. I think a peanut connector would be a great thing for him to assess also - if you have one of those spare? Happy to return it afterwards and reimburse for any out of pocket expenses etc.

I can do you some peanuts but if you’re going to make the joints then you’ll need the proprietary bit and I only have one of those at the minute. Happy to send it over but I will need that back as it’s pricey!

 

[sammy.se]

I can do you some peanuts but if you’re going to make the joints then you’ll need the proprietary bit and I only have one of those at the minute. Happy to send it over but I will need that back as it’s pricey!

ah good point ! Don’t worry in that case, I’m sure he can just use some online videos instead (I.w. Your ones ) - but thank you regardless, much appreciated

 

[petermillard]

ah good point ! Don’t worry in that case, I’m sure he can just use some online videos instead (I.w. Your ones ) - but thank you regardless, much appreciated

No problem. I've got a Domino Connect corner piece and inline panel connector, some Peanut 2s, Lamello Clamex and Tenso P14, and some Clamax P-20 - the biscuit jointer ones - and some FastCap FASTenon - the hammer-in ones - if you want to try them. Figured they were all worth having if only to look at! DM me your address and I'll get them out to you. Cheers! P

 

[sammy.se]

No problem. I've got a Domino Connect corner piece and inline panel connector, some Peanut 2s, Lamello Clamex and Tenso P14, and some Clamax P-20 - the biscuit jointer ones - and some FastCap FASTenon - the hammer-in ones - if you want to try them. Figured they were all worth having if only to look at! DM me your address and I'll get them out to you. Cheers! P

Thank you! Message sent