Sanding Abrasive For Mini Belt & Disc Sander

[Mikegtr]

I am wanting to buy quality sanding abrasive--different grits--for a mini belt & disc sander. Size of belt is 25mm x 760mm--size of disc is 125mm (5"). Can you recommend a good make of abrasive--where to buy? There are various makes of abrasive out there to choose from---from past experience of buying abrasive it pays to buy a quality make.

I want to buy a 5" loop adaptor kit to transform the 'glue on' sanding disc to the loop type. Where to buy?
Also- what make of sheet 'stick on' normal sanding sheets will last?

Your advice welcome. Many thanks

 

[fleyh]

I'd like to know the answers to your questions as well.

In my previous searches, I came across a few places advertising 1x30" belts, but none sounded familiar.

If you want to try your luck, please report back on how it went.

3M Trizact
- https://bndabrasives.co.uk/product-...ng-belts/?_wcf_filter=true&width=325&_paged=1
- https://www.multitoolproducts.com/product-page/grind-belt-760-1x30-trizact-237aa

3M Cubitron II
https://bndabrasives.co.uk/product/...60mm-pack-of-12-various-grits-available-p120/
https://www.multitoolproducts.com/product-page/grind-belt-25x760mm-1x30-cubitron

This place seems to have a selection of various options, but again, I’m not sure if they actually deliver.
- https://prosharpeningsupply.com/collections/1x30-abrasive-belts



I haven't looked into swapping the disc for a hook-and-loop one because mine is permanently covered as I kept scraping my palm on the spinning disk while using the belt side.