Made the MFT bench this weekend just gone. Still to fit an apron on the front with routed out T-track for a light clamping vise. Benchdogs fence with Benchdog rail dogs under the track. I am now a poor Peter Millard imitation.
Made the bike shed over few preceding weeks. Mostly from 2x4 and 2x2 leftovers I had hanging around. The roof panels were made from wardrobe door things free from the bin out the front of Ikea (not even chipboard? some kind of melamine faced mostly empty sort of plastic honey combed cavity stuff). I didn't clad the sides or back, just stretched shed roofing felt as walls instead. Then I broke up pallets and lined the inside with pallet boards so I don't put bike and things through the felt (did this after taking the photo below so you can't see that). So all together the build, if you don't count the timber I had hanging around (that's free in my head lmao), cost me I dunno an additional about £60: some battens, feather board, shed roofing felt.
The pallet ripping thing is worth a mention. Bought a pallet break bar thing for £30, but then saw what was described as a nail puller gun (it's actually more of a nail gun without a magazine) on Amazon for £32, a good £50 cheaper than the more common £80 Air Locker popular brand one. I expect the cheapness will show up if/when I need to replace the piston thing. It's a very scary piece of kit, you can shoot a nail a long way down the garden with it (I had to try) like an airgun. Deadly. Look at my short vid I made using it:
