Ed209
Established Member
I am a picture framer and have had to take and put back several times a large picture (movie poster size) that is framed with a thin 10mm wide chrome plated frame, where I have dismantled/re assembled several Times there are now a few very fine scratches on the frame. I have tried very fine 3M polishing paper that I got for guitar fret polishing and also some jewellers red polishing past, nothing is really working also tried some 000 wire wool, I think I may have reduced the scratches a bit but at the cost of nearly wearing by thumb down to the bone. So looking for suggestions I noticed the likes of Dremel do a polishing kit, it would not be practical to take the frame to a wheel I would need something to use on the assembled picture. The chrome plating is probably very thin. It would be used again as it’s quite a common problem regardless of how carefully you handle the material.