Plastic extrusion for glass door panel

[Graham Brazier]

Anything like these

 

[Graham Brazier]

uPVC Window Door Gasket Seal
Strip Glass Fixed Repair Seal
Shockproof Waterproof

Comes to in clear

 

[John Brown]

uPVC Window Door Gasket Seal
Strip Glass Fixed Repair Seal
Shockproof Waterproof

Comes to in clear

That's the stuff!
Do you have a link to the site?

 

[Graham Brazier]

That's the stuff!
Do you have a link to the site?

It was on eBay
Try this

https://www.ebay.co.uk/itm/12425054...ar=425108584093&widget_ver=artemis&media=COPY

 

[John Brown]

It was on eBay
Try this

https://www.ebay.co.uk/itm/12425054...ar=425108584093&widget_ver=artemis&media=COPY

Ok. On closer inspection, I don't think that would work. I've ordered some clear plastic tubing, as per an earlier suggestion, so I'll wait till that turns up and give it a try.

Thanks again to all.

 

[cowtown_eric]

I dunno if they are in UK, but one of the largest N.Am distributors is CRL...

they have a great website, but here's likely the page that will help.
https://www.crlaurence.com/crlapps/...GroupID=6712&History=39326:1:39325:4940&pom=0
Check out the air and dust seal, It looks somewhat like what you describe, and then look at the specs on it ...it seems to tear in half.

Maybe it helps.

Eric in Calgary

 

[John Brown]

I dunno if they are in UK, but one of the largest N.Am distributors is CRL...

they have a great website, but here's likely the page that will help.
https://www.crlaurence.com/crlapps/...GroupID=6712&History=39326:1:39325:4940&pom=0
Check out the air and dust seal, It looks somewhat like what you describe, and then look at the specs on it ...it seems to tear in half.

Maybe it helps.

Eric in Calgary

Thanks. All those profiles seem to have a central slot or channel for the glass. In my doors the profile is pushed in from each side. I've received the plastic tubing now, and inserted it. I'll have to see if it does the job. If not I'll try something else. Silicone caulk maybe, or putty....