(Original) Hegner Multicut 2 manual sought

[bugbear]

Following a successful weekend's car booting, I have sudden interest in a downloadable manual for a Hegner Multicut 2 (from 1986).

Both these ones are too modern:

http://www.advmachinery.com/manuals/H-manual.pdf
http://www.daltonsmachines.com/uploads/ ... Manual.pdf

Can anyone help?

BugBear

 

[martinka]

I spent some hours searching out manuals and found the same two as yourself plus one that is dated 1997. Probably still too new, but for what it's worth, you can get it at
http://fileserve.nhsch.co.uk/Manuals/Volume 5 of 8/Technology Supplies/

 

[bugbear]

I spent some hours searching out manuals and found the same two as yourself plus one that is dated 1997. Probably still too new, but for what it's worth, you can get it at
http://fileserve.nhsch.co.uk/Manuals/Volume 5 of 8/Technology Supplies/

You're quite right - too modern. Thanks for the link, though.

BugBear

 

[bugbear]

I think the modern(ish...) Multicut 1 is the same (or VERY similar) as the original multicut 2.

Certainly, fixed speed, 14" throat, no "quicklock" all match.

Yeah, confirmed (pretty much):

http://www.hegner.co.uk/common/support/ ... inder.aspx

says "For older Multicut 2 products, please use Multicut 1"

BugBear

 

[martinka]

You bet me to it. I spotted that then got sidetracked with a phone call. Handy to know.

Martin.