NVR Switch wiring. No idea how to do it!

[kinsella]

Chaps
Just bought this off the internet assuming it would come with a basic wiring diagram. ya, well you pay for what you get. Anyone know how to wire this in single phase. Where does the live, neutrals go.
ie using this you have a feed live and neutral, and a motor live and neutral. The terminal block has no markings to say where they go.

 

[CHJ]

You have a wiring diagram on the unit.

It's A/C power, in this respect live and neutral have no significance as far as the NVR is concerned.

Power into the white wire terminals.
Feed to the motor from the black wire terminals.

 

[moosepig]

^ wot 'e said

 

[Monkey Mark]

The power-in goes to the white wires. Out to the motor is the black wires. It should not matter which way round they are on each pair.

Edit - beaten to it.

 

[kinsella]

Thanks chaps.
You guys forget, this is magic circle stuff to most of us. So i thank you all in your pointy magicelectrical hats.

So if i read correctly. I put the incoming blue and brown wires into the two white wires (no relevance to which terminal), and i put the outgoing blue and brown wires into the black and if i read Monkey right, it doesn't matter if i have the blues or the brown right next to each other, (ie no relevance to which terminals)?

Sounds like madness to me. But i still have to remind myself every time which colour is which.

 

[mindthatwhatouch]

Thanks chaps.

So if i read correctly. I put the incoming blue and brown wires into the two white wires (no relevance to which terminal), and i put the outgoing blue and brown wires into the black and if i read Monkey right, it doesn't matter if i have the blues or the brown right next to each other, (ie no relevance to which terminals)?

You got it :lol:

 

[kinsella]

Thanks everyone
Followed your instructions and all working correctly.

 

[Graham Orm]

I've had one of these in my electrical box for ages. I can use it now!!! =D> :roll: