Not another.....Name that Machine
- Thread starter Scrit
- Start date
Help Support UKworkshop.co.uk:
Inspector
Nyuck, Nyuck, Nyuck!
Scrit":3fgv0arz said:
Well the name on the machines are Robertson which is the inventor/maker of square socketed screws that bewilder the Americans south of us. Way better design than all the cross headed families of screw heads. Neither machine looks like they are actually for making the screws, so that leaves packaging for the screws instead. Are they the cardboard cutter and folder for the boxes?
A
Anonymous
Guest
Would machine no 3 be a device to trim shingle's to size?
If No 2 is by Robertson it must be a Pocket hole driller but you would need a big pocket to fit that in 
Maybe a dovetail cutter as Leigh who make the D4 are Canadian, one side does the pins, the other the tails
No 3 could be for slicing oyster veneers.
Jason
Maybe a dovetail cutter as Leigh who make the D4 are Canadian, one side does the pins, the other the tailsNo 3 could be for slicing oyster veneers.
Jason
Yessir! It is a Robinson ZU/E Electric Dovetailer which could cut pins in one end and tails in the other on boards up to 18in long:Shivers":3frzmvop said:
Although at 20-3/4cwts it's just a bit heavier than the later Leigh dovetail jig
Scrit
mr spanton":3towpp19 said:
Well it is indeed a guillotine slicer, but I thought that shingles had to be rived along the grain otherwise they lose part of their strength. As for oyster veneers, heve they ever been that popular to warrant a 5 tonne machine?jasonB":3towpp19 said:
Try thinking more mass production and how things were until the 1970s and you may get it. I'm sure Ian Dalziel would be in with a chance on this one!
Scrit
Jason has it! The machine is a Robinson VO Timber Slicer and weighed in at all of 102 cwts (or a tad over 5 tonnes) and was some 12 feet wide x 9 feet deep. It was "specially designed for the rapid and economical production of box boards, giving increased output whilst reducing wastage to a minimum". The advertising literature goes on to say that it was capable of cutting 10,000 pieces of 24 x 6in timber per hour and in doing so would make a saving of 52 cubic feet of timber over using a bandsaw to saw the materials. The machine was loaded with steamed timber (boiler attended by a lad, no less) to make the slicing operation quicker and easier. Of course with the move towards cardboard and plastics in the 1960s machines such as this fell out of favour and are no longer seen in the UK, although I do wonder if any were exported and are still in use. after oragges and certain fruits still come in wooden cratesjasonB":3vxwuclj said:
Thank you all for taking part and a Happy New Year to you all!
Scrit
Steve Maskery
Established Member
Nice one scrit, thank you for organizing that. I'd never thought that orange boxes actually have to be made!
Happy New Year to you too.
Happy New Year to you too.
engineer one
Established Member
just think what it would be like if there were prizes :twisted: :lol: :lol:
off to the land of nod :lol:
paul :wink:
off to the land of nod :lol:
paul :wink:
