9fingers
Established Member
Both machines are now taken Subject To Collection and I have two reserves. Thanks for the interest.
Bob
----------------------------------------------
I need to shift my Kity Table Saw and Planer Thicknesser to make room in the workshop.
Kity 617 tilting table saw
Light hobby use from new.
Table 400 x 550 with L & R mitre slots
Depth of cut 67mm typical with the current fitted blade
Mitre gauge
Fence
Blades (several when I find them all!)
Drive belt
Adaptor to take 8" dado head for those who like them
Looking for a good home for a faithful tool
Only disposing of it as I have a newer bigger CI table saw now
It has been taken off a CK26 Combi machine and has no stand or motor. Normally runs with 2HP motor
Assistance will be offered to help with motor fitting if needed.
---------------------------------
Kity 636 Table Planer- Thicknesser (Table top model)
10" x 6" capacity (250 x 150 mm)
42" tables.
All guards present and correct.
Rubber outfeed roller in good condition - no hint of slippage.
Anodised aluminium table are in good condition and flat
Adjustable steel fence - no rust
In excellent condition. only selling as I have upgraded to larger individual planer and thicknessing machines.
No motor included but easily added.
Designed to run from 2hp (1500watt) 2 pole (2850 rpm) motor.
Assistance will be offered to help with motor fitting if needed.
Drive belt included but possibly a longer one might be needed according to motor location - readily available.
Suitable new motors will cost about £100 delivered from Ebay vendors
So with a little effort you will have capable machines very cheaply.
Both items are collection only ASAP from Romsey (SO51 5RS postcode)
This is a genuine offer so no timewasters please
Bob
Bob
----------------------------------------------
I need to shift my Kity Table Saw and Planer Thicknesser to make room in the workshop.
Kity 617 tilting table saw
Light hobby use from new.
Table 400 x 550 with L & R mitre slots
Depth of cut 67mm typical with the current fitted blade
Mitre gauge
Fence
Blades (several when I find them all!)
Drive belt
Adaptor to take 8" dado head for those who like them
Looking for a good home for a faithful tool
Only disposing of it as I have a newer bigger CI table saw now
It has been taken off a CK26 Combi machine and has no stand or motor. Normally runs with 2HP motor
Assistance will be offered to help with motor fitting if needed.
---------------------------------
Kity 636 Table Planer- Thicknesser (Table top model)
10" x 6" capacity (250 x 150 mm)
42" tables.
All guards present and correct.
Rubber outfeed roller in good condition - no hint of slippage.
Anodised aluminium table are in good condition and flat
Adjustable steel fence - no rust
In excellent condition. only selling as I have upgraded to larger individual planer and thicknessing machines.
No motor included but easily added.
Designed to run from 2hp (1500watt) 2 pole (2850 rpm) motor.
Assistance will be offered to help with motor fitting if needed.
Drive belt included but possibly a longer one might be needed according to motor location - readily available.
Suitable new motors will cost about £100 delivered from Ebay vendors
So with a little effort you will have capable machines very cheaply.
Both items are collection only ASAP from Romsey (SO51 5RS postcode)
This is a genuine offer so no timewasters please
Bob
But, I agree with Mike's comment - and I also hope the new owner(s) keep us updated with plenty of photographs in time! :wink:
