Tobi
New member
I have recently purchased a New Yankee Workshop plan for a De-Lux Router table. The plan shows I need a hardware kit #63010. Where do I get this or what alternative can I use? Where's the best place to by the alternative hardware?
New Yankee Hardware
- Thread starter Tobi
- Start date
Help Support UKworkshop.co.uk:
9fingers
Established Member
Google is your friend
Rockler do the kits in support of NYW
http://www.rockler.com/product.cfm?page ... okietest=1
Brimarc are the UK agent for the plans so they might be able to help if you are UK based
Otherwise axminster used to do a U channel track and knobs etc are pretty standard from lots of sources though you might have to buy 10 of any one size.
hth
Bob
Rockler do the kits in support of NYW
http://www.rockler.com/product.cfm?page ... okietest=1
Brimarc are the UK agent for the plans so they might be able to help if you are UK based
Otherwise axminster used to do a U channel track and knobs etc are pretty standard from lots of sources though you might have to buy 10 of any one size.
hth
Bob
Newbie_Neil
Established Member
Hi Toby
Welcome to the forum.
Cheers
Neil
Welcome to the forum.
Cheers
Neil
mel
Established Member
hi tobi
filling out your profile might help
ive got some of them no mortice hinges somewhere, ill have a look
drawer runners are from screwfix , if they still stock them
welcome to the board anyway
regards
mel
filling out your profile might help
ive got some of them no mortice hinges somewhere, ill have a look
drawer runners are from screwfix , if they still stock them
welcome to the board anyway
regards
mel
Mike.C
Established Member
Hi Toby,
Welcome to the forum. Give Brimarc a ring http://www.brimarc.com/home.php3 they may be able to point you in the right direction, or could try one of their agents http://www.brimarc.com/home.php3?page=links
Did you buy the plan direct from The New Yankee Workshop website? What about sending them an email to ask if they can supply the parts that you are after.
If all else fails Philly the director of The Normster Fan Club may have some idea where you can get the parts.
Good luck
Mike
Welcome to the forum. Give Brimarc a ring http://www.brimarc.com/home.php3 they may be able to point you in the right direction, or could try one of their agents http://www.brimarc.com/home.php3?page=links
Did you buy the plan direct from The New Yankee Workshop website? What about sending them an email to ask if they can supply the parts that you are after.
If all else fails Philly the director of The Normster Fan Club may have some idea where you can get the parts.
Good luck
Mike
Barry Burgess
Established Member
Tobi I am just completing a similar stye table
The cheapest source for the track is Rockler but if you want to get it locally Brimarc has both the mitre and shallow dept T track but they are about £22 a 4" length . I bought a Woodpecker router plate but it was more trouble than it was worth and held up my table for over 3 months. Try the Axminster or Rutlands versions. You cannot use the USA NVR switches but Trend do a version that works - just make sure the wattage of your router else go over the top and use the 2700W Axminster version. If you want sliding drawer rails try Buller they are cheaper than mosthttp://www.bullerltd.co.uk/section.php?xSec=274&jssCart=45bacc893a705fe5a4f5466232567ee9
If you PM me we can discuss the options further
Barry
The cheapest source for the track is Rockler but if you want to get it locally Brimarc has both the mitre and shallow dept T track but they are about £22 a 4" length . I bought a Woodpecker router plate but it was more trouble than it was worth and held up my table for over 3 months. Try the Axminster or Rutlands versions. You cannot use the USA NVR switches but Trend do a version that works - just make sure the wattage of your router else go over the top and use the 2700W Axminster version. If you want sliding drawer rails try Buller they are cheaper than mosthttp://www.bullerltd.co.uk/section.php?xSec=274&jssCart=45bacc893a705fe5a4f5466232567ee9
If you PM me we can discuss the options further
Barry
Tobi
Welcome to the forum.
Welcome to the forum.
