For Sale Machinery For Sale -SOLD

[Kev]

I am selling a few machines that have just sat in my workshop gathering dust since I bought new machinery last year. Have put a brief description but if you have any questions please PM me and will do my best to answer.

Kity 1619 Table Saw (240V)-SOLD

Bought this new about 15 yrs ago. Is in good condition for its age and has been looked after. Has side extension table and sliding fence (don't ever remember using). Will need a 20amp power supply. I also have a Dakota tenoning jig which you can have with it. Has the original 100mm hose and connector for the blade guard hose. Has the original 270mm blade along with three other 250mm blades but all could do with a clean and sharpen. £450

Strartrite SD300 Planer/Thicknesser (SOLD)

Again bought this new about 8-9 years ago and no longer needed. Will need 20amp supply (240V). Have a couple of sets of blades but these will need sharpening. Comes with blade setting jigs, push blocks etc. Also have an old fox chip/dust extractor which had it connected up to which you are welcome to take away as well. £650 . Please be aware this is a seriously heavy machine.

Record Bench Power Drill (SOLD)

Bought from new about 4 years ago but has had barely any use. 240V. Have manual and all tools that come with it. £200

Thanks for looking.

 

[Bgray1]

PM'd

 

[topchippyles]

Decent looking machines

 

[John samson]

Hi Kevin,

I’m interested in finding out a bit more about the drill press.
Can you please confirm the chuck size, speeds and motor power etc?
I’m in Chelmsford in Essex so I suppose your location would be good to know if possible.
Regards
John

 

[Kev]

Hi Kevin,

I’m interested in finding out a bit more about the drill press.
Can you please confirm the chuck size, speeds and motor power etc?
I’m in Chelmsford in Essex so I suppose your location would be good to know if possible.
Regards
John

Hi John will have a look in the morning and get back to you. I am in a village called Brookland on the Romney Marshes which is between Ashford and Rye.

Kev

 

[Brian H]

Kev, just pm'd about planer

 

[Kendle99]

Morning , what model is the pillar drill ?

 

[Myfordman]

Model is obvious if you just look

 

[thedavemeister]

Nice looking kit. Bit far for me up here in Scotland!

 

[Kev]

Hi Kevin,

I’m interested in finding out a bit more about the drill press.
Can you please confirm the chuck size, speeds and motor power etc?
I’m in Chelmsford in Essex so I suppose your location would be good to know if possible.
Regards
John

Hi John thought it may be easier if I just *** the spec from the manual. Hope this answers everything.

 

[Selwyn]

That planer looks a cracking buy

 

[DBT85]

I swear a 1619 went for nearly double that on ebay about 10 days ago!

 

[craigy]

PM’d

 

[John samson]

Hi John thought it may be easier if I just *** the spec from the manual. Hope this answers everything.
View attachment 95345

Thanks Kev that’s great

 

[Kev]

I swear a 1619 went for nearly double that on ebay about 10 days ago!

Don't tell me that

 

[mindthatwhatouch]

PM’d re planer, if it doesn’t go to one of the above posters.

 

[John samson]

Hi John will have a look in the morning and get back to you. I am in a village called Brookland on the Romney Marshes which is between Ashford and Rye.

Kev

Hi Kev,

I’m new to the forum and i can’t work out how to send a personal message could you possibly email me ? [email protected]. The pillar drill looks good.

Thanks

John.

 

[George w]

Hi Kev,

Interested in the saw please,

Can't pm as new member here.

Not sure if you can message me either but me email address is [email protected] please do get in touch!

George

 

[Kev]

Hi Kev,

Interested in the saw please,

Can't pm as new member here.

Not sure if you can message me either but me email address is [email protected] please do get in touch!

George

Hi George have emailed you details.
Kev

 

[Bgray1]

Hi Kev, I've Pm'd you regarding the planer. Would also be interested in the saw if no one else has claimed it. Cheers!