Mike-W
Established Member
DUST EXTRACTOR Record Power DX3000- small (50 litre) Drum dust extractor, 430mm diameter by 560mm high. Would suit bandsaw or bench mounted power tools. Fitted with a 4” hose connector and a 4”>2” adaptor with a short length of 2” hose.
It comes with wheels that are detachable from the base. £50.
DOVETAILING JIG Titan complete with guide bush, router dovetail cutter and instructions (very similar to the Axminster white Dovetail jig) £20.
SCREW PRESS This is a 10” X 12” Photographic Dry mounting press (fitted with a heater controlled by a thermostat in the bottom plate) I have found it most useful for pressing down Veneer using hot melt glue film. Will take a board 1” thick by 26” wide by any length. £15
CARVERS ‘VICE’ A very heavy weight ball and socket swivel head which with slight modification would make an excellent holding device for working on and gaining all round access to awkward shapes £10.
Carriage at cost or items can be collected from Berkshire
(M4 Junction 12)
Please email me if you are interested.
Mike
It comes with wheels that are detachable from the base. £50.
DOVETAILING JIG Titan complete with guide bush, router dovetail cutter and instructions (very similar to the Axminster white Dovetail jig) £20.
SCREW PRESS This is a 10” X 12” Photographic Dry mounting press (fitted with a heater controlled by a thermostat in the bottom plate) I have found it most useful for pressing down Veneer using hot melt glue film. Will take a board 1” thick by 26” wide by any length. £15
CARVERS ‘VICE’ A very heavy weight ball and socket swivel head which with slight modification would make an excellent holding device for working on and gaining all round access to awkward shapes £10.
Carriage at cost or items can be collected from Berkshire
(M4 Junction 12)
Please email me if you are interested.
Mike
