Instruction Manual
- Thread starter rifler99
- Start date
Help Support UKworkshop.co.uk:
toolsntat
Yep, I collect tools and tat
I`ll ask someone but don`t hold your breath :roll:
It may be a "hiding to nothing" :wink:
Andy
It may be a "hiding to nothing" :wink:
Andy
dunbarhamlin
Established Member
Could try:
J. D. WOODWARD, 7 Higham Way, Hinckley, Leicestershire LE10 2PU, England.Tel: 01455 613432 Fax: 01455 613432
J. D. WOODWARD, 7 Higham Way, Hinckley, Leicestershire LE10 2PU, England.Tel: 01455 613432 Fax: 01455 613432
hog&bodge
Established Member
All I could find on web for fret saw
http://www.scrolling.co.uk/diamond/Diam ... VS_Saw.pdf
http://www.scrolling.co.uk/diamond/Diam ... VS_Saw.pdf
John. B
Established Member
Rifler,
You might do better with replies if you put it in the scroll saw section #-o
Welcome to the forum BTW.
John. B
You might do better with replies if you put it in the scroll saw section #-o
Welcome to the forum BTW.
John. B
DaveL
Established Member
Hi rifler99,
Welcome to the forum.
I have moved your post to the scrolling section.
Welcome to the forum.
I have moved your post to the scrolling section.
Thanks Dave - I'm sure many of us would have overlooked this post if you hadn't moved it.
Hi Rifler
Diamond saws were manufactured by Doug Woodward until last year when he passed away. As far as I can make out his company died with him, leaving nobody to continue his superb customer support.
I have a couple of Diamond saws and the manual (which isn't much more extensive than the link from hog&bodge) is suitable for all models. However, where I've put my manual is another matter... I'll root around for it over the next couple of days (I'm a bit busy right now) and see if I can find it. If I can, I'll scan a copy and email it to you.
It would probably be just as easy to ask any questions about the machine right here - I'm sure our collective knowledge will be able to get your saw set up properly.
Gill
- I'm sure many of us would have overlooked this post if you hadn't moved it.Hi Rifler
Diamond saws were manufactured by Doug Woodward until last year when he passed away. As far as I can make out his company died with him, leaving nobody to continue his superb customer support.
I have a couple of Diamond saws and the manual (which isn't much more extensive than the link from hog&bodge) is suitable for all models. However, where I've put my manual is another matter... I'll root around for it over the next couple of days (I'm a bit busy right now) and see if I can find it. If I can, I'll scan a copy and email it to you.
It would probably be just as easy to ask any questions about the machine right here - I'm sure our collective knowledge will be able to get your saw set up properly.
Gill
