Grout for patio slabs

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

OLD

Established Member
Joined
9 Aug 2004
Messages
1,397
Reaction score
0
Location
nantwich
Concrete slabs 5mm min joints. I have spent quite a lot of time removeing old morter and am power washing . Looking for your recomendation for the best grout that will stay stuck there are lots on youtube etc but i would like your best ideas please.
 
I bedded mine on a dry mix concrete and used very fine sand brushed in when set.

Rod
 
Cement and sand (1:3) mortar. You can cheat by brushing in the mixture dry and give a light watering with a watering can but a well mixed mortar seems to work best.

Regards Keith
 
OLD,


Brush a damp mortar mix into the cracks. (Not too wet and sloppy) Remove any excess mortar from the slabs by spreading sawdust or planer chippings, and then brushing them up. The shavings will pick up any dampness that could stain the flags. I did my patio in increments of about 4 metres square. (Nah... Not that much! Maybe 2 square yards at a time!)
HTH

John
 

Latest posts

Back
Top