Gomex Blades

[icanattitude]

I have a Saw Master Model AX433 table saw that came with a Gomex blade. I can't find anyone in the States that sells them. Any recommendations for purchase in the UK? The blade is labeled 002037 5EA 10T2 120 D-20 Z-36 1.8/1.1. I have no idea what any of that means. I use the saw for cutting material used in a trophy shop. It's a fabulous saw but the blade is very dull - no idea how long it's been in use as I bought the whole thing from a trophy shop that was going out of business.

Appreciate any guidance.

 

[beech1948]

http://www.applegate.co.uk/engineering/ ... gate.co.uk

Check above site for details re Gomex

http://www.woodworkingtooling.co.uk...tch-05ba08-200-2-0/1-4-20-z-80/prod_1250.html

Check above site for a Uk supplier.

Gomex seems to be very specialised in high teeth count blades intended for very thin laminates, woods, plastics.

Al

 

[icanattitude]

Thanks!

 

[promhandicam]

Just to clarify, is this the main saw blade or a scoring blade for a larger panel saw? If it is for the main blade, I would be very surprised if you can't find an equivalent blade in the US. The code you have means that the blade has 36 teeth, has a kerf of 1.8mm with a plate thickness of 1.1mm, the bore is 20mm and (I think) the diameter of the blade is 120mm. These Mafell blades would I think do the job. http://www.mtmc.co.uk/Mafell-Circular-Saw-Blades---120mm__c-p-0-0-12733233.aspx

 

[Bradshaw Joinery]

i was under the impression gomex ceased trading a few years back!

any similar industrial blade would be as good, especially if you can get it from the states!

 

[the_g_ster]

Awesome blades, there's a place in Eastleigh in Hampshire that may sell them, think called Saw Tec.

 

[Bradshaw Joinery]

Give doug @ cutting solutions a try,

I received some blades I ordered on Monday, and there excellent! Completely transformed my Bosch mitre saw.