FREE GIVEAWAY drilling machine.

[toolsntat]

Airpowered up drilling machine.
FTAGH
More info here
do-a-lot-of-pierced-scrolling-t118616.html
Can you give it a good home?
Not too heavy.
Cheers Andy

 

[toolsntat]

This is still available to whoever and looks like it'll get wrecked over the winter if not re-homed
Even if you only want it for parts I'm OK with that. 8)
Near Hinckley and will help transport it to a further destination :wink:
Cheers Andy

 

[Logger]

Hi Andy,

If it is still up for grabs in a couple of weeks, i might be interested.

I am moving into my new workshop next week. I will be moving in all my kit and have a plan for the layout. Once in, i can see if it works in which case, i should have room. I have a decent compressor. I am up near Bath, so not too far a trip.

Do you have dimensions?

Cheers

Nick

Sent from my SM-G950F using Tapatalk

 

[Lonsdale73]

Airpowered up drilling machine.
FTAGH
More info here
do-a-lot-of-pierced-scrolling-t118616.html
Can you give it a good home?
Not too heavy.
Cheers Andy

Any idea what it's original use was? It's a while ago know, afore the whole world went digital, but the print company I used to work for bought something similar to punch holes in films and plates for (supposed) speed of mounting and registration on the printing press.

 

[sunnybob]

This is still available to whoever and looks like it'll get wrecked over the winter if not re-homed
Even if you only want it for parts I'm OK with that. 8)
Near Hinckley and will help transport it to a further destination :wink:
Cheers Andy

I think he;'s at Hinkley Leicestershire, not Hinkley point somerset 8)

 

[toolsntat]

Ok,
Yes Bob Hin(C)kley Leicestershire so not as near as you might think Nick but you're welcome to it if summat can be arranged 8)
Size TBC is approx 2`-6" X 5`long
It was/is a printed circuit board driller, with unlimited potential :wink:
Cheers Andy

 

[Logger]

Ah, i did wonder after typing it, but have been working in a village today that still has absolutely no mobile coverage!

I will see how workshop move goes and if space and it is still up for grabs, i may take a trip.

Cheers

Nick

Sent from my SM-G950F using Tapatalk

 

[sunnybob]

Hinton St. George? 8)

 

[Logger]

No, Marshfield, north of Bath. Nice village, but always reminds me of village in film Hot Fuzz!

Sent from my SM-G950F using Tapatalk

 

[toolsntat]

Still up for grabs :wink:
Cheers Andy

 

[Inspector]

Darn! Wrong continent. Looks like it works on the same principal as an optical comparator. I'd be all over it if I lived in your neck of the woods.

Pete

 

[toolsntat]

Be a shame to break it down (hammer)
Andy

 

[Billy_wizz]

Is the drill speed variable to enable metal drilling as well? And does it take standard drill bits?

 

[toolsntat]

If the air is regulated I assume it'll slow down and not sure about bit sizing.
If you pm me a number I'll have a chat with you.
Cheers Andy

 

[toolsntat]

Well, I keep pushing this as it is way too good for me to knock it apart.
What you do with it is up to you.
The weather is closing in around it again.
If you have an air supply don't be seeing it all out of love....
Delivery between Leicester and Scunthorpe may be available?
Cheers Andy

 

[Tris]

But you'll be so lost without it....





Getting my coat

 

[Inspector]

I can't believe a scroll sawer hasn't jumped on this thing. I think you should try and eBay it. Be better to see it go to someone than be scrapped.

Pete