Forum Users Routers

[Dog]

Ok I've started a Router thread so that Forum Users can reveal all about their router buying/using habits :wink:

x 2 Trend T3's - 1/4" - Freehand use.
JCB D-PR12 1/2" - Table mounted.

*Please Stick this thread someone, and I'm being polite*

 

[Anonymous]

DW 625EK Table mounted
Trend T3 1/4 free hand use
Bosch POF 500 A - Free hand and for Dovetail jig

Jase

 

[Anonymous]

Trend T3
Trend T5
Trend T11
Dewalt (in the Rat)
Triton (in the table)
Fixed base from B&Q

 

[Alf]

DW 625EK in the 'Rat
Trend T5 Mk2
Stanley #71
Millers Falls #67
Stanl- What? What's funny? What'd I say? :wink:

Cheers, Alf

 

[Charley]

Bosch 500A
Trend T5
Dewalt 625EK
Porter Cable 7529

 

[MikeW]

Hi All,

Bosch 1617 evs
DeWalt 618
Festool OF 2000E (on the rat)

Not bad for someone who hates (and that's not too strong a word here) motorized routers. I have more arm-powered ones--but when it comes down to productivity I cave-in.

Besides, if I'm gonna screw-up a board there's nothing as fast as a powered router :wink: .

 

[Nailer]

Hi all,

Ryobi RE601 - Table Mounted & Butt and Scribe joints in kitchen worktops.

Trend T5 - Freehand & Dovetail jig

Hopefully getting a Triton for dedicated table use or if i can wait the Trend T11 (bank balance allowing) .

Cheers, Kev

 

[houtslager]

MikeW said -

Besides, if I'm gonna screw-up a board there's nothing as fast as a powered router .

:sign3:

2 x festo 1100's
1 x Scheer in dovetail jig by the same.
1 x ancient ELU MOF177E
1 x Casals 1000 {aka Freud in original colours ]
1 x Makita 3612 for light hand work
1 x JCB/Silver can't remember which 1/2"fixed temporily in table
plus gawd knows how many bits :?

 

[johnelliott]

Trend T9
Festool OF1400
Elu 96
Makita trimmer
3 B&Q 2000W routers, only one of which is in regular use (in a router table)
John

 

[Anonymous]

DW621
and, erm, erm....nope, that's it.

 

[Anonymous]

A B&Q special,
:-$ Don't laugh, I am just starting out.
Hand held at the moment but plans for a home made table [-o<

 

[woodshavings]

Trend T3
Power Devil in Woodrat
Triton in table (brilliant)
B&Q Power Pro 1250
JCB 1/2 inch

 

[llangatwgnedd]

Freud 2000

Stanley 71 :roll:

 

[Karl59]

Bosch 500 - purchased in the late 80's and still going strong albeit semi retired these days.
Freud 2000 table mounted
CMT 1850
B&Q 1250

 

[Noel]

Freud 2000 - Excellent
Bosch 900 ACE - Excellent
Trend T3 - Adequate

 

[CHJ]

1 X Bosch POF 500A Still a favorite due to small size and weight.
1 X Ferm FBE 1050 (8mm) mounted in Trend Guide Base
1 X Ferm FBE 1050 (8mm) mounted in small table. (both Ferms bought in Germany for less than 29 euro each with set of basic cutters.)
1 X B&Q Pro 2050R (1/2") Permanent Large Table fixture. (bought from some fellow in Liecestershire)

 

[Scott]

DW 625EK (in table & out)
DW 621
Some Black and Decker thing that the knobs keep falling off
T3

 

[Midnight]

Freud FT 2000E (2 off) mainly table mounted

DeWalt 621

the others died...

 

[uwelin]

Festool OF 1010 (freehand)
Freud 2000 (sittin' on the 'Rat)
2 Scheer HM14
Scheer HM9

Greetings from a frequent lurker from Germany

Uwe

 

[tim]

DW 625EK - freehand
Bosch 1300 - table (on loan)
Bosch POF 600 - used as trimmer/ for arrising

Cheers

Tim